Canon DR-5060F Instructions Manual page 31

• None
The image to be saved to file is not given a file separator even if the New File
key is pressed.
• Scan, Continue Scanning
Images are saved to separate files from the next image by pressing the New
File key.
MEMO
The [File Separator] setup item changes when the optional patch code/
function sheet detector is attached. (See "Using Patch Codes/Function
Sheets" P. 47)
The New File button lights each time that scanning is discontinued when the
[Auto New File] setting in the Separation panel in the Detailed Settings
dialog box is enabled. At this time, files are automatically separated if [Scan,
Continue Scanning] is set.
5
Set [2LevelBlip]. (See "Separation" P. 65)
MEMO
The [2LevelBlip] setting is interlocked with the [2LevelBlip] check box in the
Separation panel in the Detailed Settings dialog box.
6
Load the original. (when Feeding Option is set to [Remote])
7
Click [Start Scanning].
Scanning is started when Feeding Option is set to [Remote].
MEMO
When Feeding Option is set to [Semi Auto], the Start key turns green and
stands by to be pressed. Load the document and press the Start key.
When Feeding Option is set to [Auto], the Start key turns green and stands
by for the document to be loaded. Load the document.
When Feeding Option is set to [Manual], the document tray rises. Load one
sheet.
Scanning Originals and Saving Scanned Images
2
29