Canon DR-5060F Instructions Manual page 34

About creation of new folders
When you create a new folder, enter the new folder name to "Current folder"
using an absolute path name, and click the [New] button. In this case, limit
the absolute path name to 256 characters.
3
Set "Feeder".
MEMO
If the "Feeder" setting differs from the camera unit currently in use in the
Backup mode, the following confirmation message is displayed when you click
[Start Scanning]. (See "Scan Batch to File" P. 27)
4
Set [2LevelBlip]. (See "Separation" P. 65)
MEMO
The [2LevelBlip] setting is interlocked with the [2LevelBlip] check box in the
Separation panel in the Detailed Settings dialog box.
5
Load the document on the document tray. (when Feeding Option
is set to [Remote])
6
Click [Start Scanning].
Scanning is started when Feeding Option is set to [Remote].
32
Scanning Originals and Saving Scanned Images