Setting Preferences And Scanning With Scangear Mf; Switching Between Simple Mode And Advanced Mode; Using Simple Mode - Canon MF6500 Series Driver Manual

Introduction
1
Setting Preferences and Scanning with
Scanning a
ScanGear MF
Document 2
Troubleshooting
3
Appendix
4
Table of Contents
Index
The ScanGear MF enables you to preview the image to be
scanned and make detailed adjustments for the image. To
use the ScanGear MF, select [Display the Scanner Driver] in
the MF Toolbox, or scan from an application.
NOTE
You cannot preview the image when using the ADF.
■
Switching between Simple Mode and
Advanced Mode
The ScanGear MF has two modes: [Simple Mode] and
[Advanced Mode]. With [Advanced Mode] you can perform
detailed settings such as resolution and contrast.
To switch between two modes, click the corresponding tab.
NOTE
2-sided scanning is available with [Advanced Mode] only.
Back Previous
■

Using Simple Mode

1.
Set documents.
TOP
Next
2-21