Installation-Electrical Connections; Grounding Instructions - GE Caf�© CP350STSS Installation Instructions Manual

INSTALLATION—ELECTRICAL CONNECTIONS
When making the wire connections, use the
A
entire length of conduit provided. The conduit
must not be shortened.
With the cooktop in place, open the front of
B
the cabinet door.
Insert the wires from the conduit through the
C
opening of the junction box.
Red
Ground
D Connect the red and black leads from the
cooktop conduit to the corresponding leads in
the junction box.
Ground wire
location
Installation Instructions
Strain Relief Clamp
Black
Red
Black
Once the connections are made, secure wires
E
together using wire nuts.
Ground

gROUNDINg INSTRUCTIONS:

The bare ground wire in the conduit is connected
to the cooktop frame. Effective January 1, 1996,
the National Electrical Code will not permit
grounding through neutral.
If used in new construction after January 1, 1996 or
in a mobile home, recreational vehicle or
if local codes do not permit grounding through
the neutral white lead, attach the appliance
grounding lead (green or copper) to the residence
grounding conductor (green or bare copper) in
accordance with local codes. When connecting
to a 3 conductor branch circuit, if local codes
permit, connect the bare ground connector lead
of the cooktop to the branch circuit neutral (gray
or white in color).
IMPORTANT:
installed into a blind counter (one with no cabinet
opening below), wire connections must be made
before putting the cooktop into the cutout
opening.
7
Red
Strain Relief Clamp
Black
If the cooktop is being