Installation-Electrical Connections - GE JP960 Installation Instructions Manual

Installation Instructions
Installation–Electrical
C
Connections
When making the wire connections,
C1
use the entire length of conduit
provided. The conduit must not be
shortened.
With the cooktop in place open the
C2
front of the cabinet door.
Insert the wires from the conduit
C3
through the opening of the junction
box.
Red
Ground
Connect the red and black leads from
C4
the cooktop conduit to the
corresponding leads in the junction
box.
Ground
wire
location
Strain
Relief
Clamp
Black
Red
Black
Once the connections are made,
C5
secure wires together using wire nuts.
Ground
The bare ground wire in the conduit is
connected to the cooktop frame. When
connecting to a 3 conductor branch circuit, if
local codes permit, connect the bare ground
connector lead of the cooktop to the branch
circuit neutral (gray or white in color).
IMPORTANT:If the cooktop is being
installed into a blind counter (one
with no cabinet opening below), wire
connections must be made before putting
the cooktop into the cutout opening
SPECIAL GROUNDING INSTRUCTIONS
• When connecting to a 4-conductor branch
circuit
• When local codes do not permit grounding
through neutral
• When installing cooktop in a mobile home
Attach the appliance grounding lead (green
or bare copper) to the residence grounding
conductor (green or bare copper) in
accordance with local codes.
7
Red
Strain
Relief
Clamp
Black
.