Panasonic NV-HS860EG-K Service Manual page 6

Model No. Model
Code
NV-HS860EG 192
NV-HS860EC 196
NV-HS860B 200
NV-HS960EG 193
NV-HS960EC 197
NV-HS960B 201
Fig.S2 Model Code & Option Code
NOTE:
Since all electrical adjustments data is still not available, perform
the Electrical Adjustment continuously.
- Turn on the Service Mode by: / (NV-HS960 series) / Rotating the
Shuttle Ring to FF side and press the EJECT key simultaneously
for 3 seconds. / (NV-HS860 series) / Pressing the FF and the
EJECT key simultaneously for 3 seconds. / Then select the Service
Mode 7 by repeating above operation in 7 times.
2.2.2. CHECKING OF MAIN C.B.A.
When servicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanism from the frame and
turn over.
And then connect the Extension Cable (VFK2744) between the POWER C.B.A. connector
(P1102) and the MAIN C.B.A. connector (P1001) as shown in
2.2.3. SERVICING THE PACK C.B.A.
When servicing the OSD Pack C.B.A. and Input/Output Pack C.B.A. and TBC Pack C.B.A. and
FSC Pack C.B.A., connections of extension cable are necessary as shown below.
Option Option Option
Code 1 Code 2 Code 3
08 117
08 117
32 116
08 117
08 117
32 116
Fig. S3
47
47
47
63
63
63
Fig. S3.