Panasonic NV-HS860EG-K Service Manual page 21

Fig. E1
Fig. E4
3.3.4. PG SHIFTER ADJUSTMENT / (AUTOMATIC)
PROCEDURES
"Turn the Shuttle Ring to FF"*1
and Press EJECT key
simultaneously for 3 seconds.
"Turn the Shuttle Ring to FF"*1
and Press EJECT key
simultaneously more twice.
Press the EJECT key for 3
seconds.
Press the CH UP key once.
Insert the Alignment Tape.
(PAL: VFJ81215H3F)
This adjustment is
automatically started. / (During
the adjustment, the picture will
be appeared on the monitor.)
Fig. E2
FIP Display
Fig. E3
CONDITION:BURST SIGNAL
75ohm TERMINATED