Panasonic NV-HS860EG-K Service Manual page 5

PROCEDURE
Turn on the Service Mode
-
"Turn the Shuttle Ring to FF"*1 and press
the EJECT key simultaneously for more than
3 seconds.
Activate the Service Mode 2
-
"Turn the Shuttle Ring to FF"*1 and press
the EJECT key in twice.
Activate the Entering Mode.
-
Press the EJECT key in more than 3
seconds.
Set the Mode 2.
-
Press the CH UP key in twice.
Display the Setting Code.
-
Press the POWER Button. / (POWER ON)
Enter the Model and Option Code.
-
Set the Model and Option code by using REW, PLAY, STOP and FF
keys on the Remote Controller. (See
S2)
Exit from Service Mode.
-
Press the POWER Button. / (POWER OFF)
-
Press FF and EJECT keys simultaneously in
6 times.
*1: NV-HS960 series only. As for NV-HS860 series, press the FF key instead of "turning the Jog
dial."
F.I.P. DISPLAY
(Colon Starts
Flashing)
Fig.S1 Service Screen (Sample)
(Normal
Indication)
Fig.S1 Service Screen (Sample)
&