Download Print this page

Pyle PMD58 Quick Start Manual

Metal detector pinpointer

Download this manual

Note – The metal detector pinpointer should be used in addition with a metal detector

When a metal detector finds the approximate position of the metallic object, the object

can sometimes be severely oxidized. This makes it difficult to differentiate between the metal

object and its surroundings. At this point the pinpointer should be used to locate the metal

object.

Please read the instructions before use.

Inserting Battery

(Please note, the 9V battery required is not included)

 Rotate the battery cover counter-clockwise

and align the small triangles on the battery

cover and housing. Remove the battery cover

Note:

Turn the sensitivity knob to the suitable critical location, in order to ensure the correct operation.

Turn on the power, the buzzer sound a tone,

and the LED is lightened.

Model: PMD58

Metal Detector Pinpointer

Slowly adjust the knob clockwise,making the

buzzer just stop sound,and the LED is extinguished.

Battery Cover:

Located at the base of the pinpointer

Page 1 Model: PMD58 Metal Detector Pinpointer Note – The metal detector pinpointer should be used in addition with a metal detector When a metal detector finds the approximate position of the metallic object, the object can sometimes be severely oxidized. This makes it difficult to differentiate between the metal object and its surroundings.
Page 2 Inserting Battery  Ensure that the battery polarity is correct, insert the battery and place in the housing  Tighten the battery cover clockwise in the direction of the lock arrow  If the pinpointer is not used for an extended period of time, remove the battery Operating the Pinpointer ...