Lincoln Electric INVERTEC 275TP Operator's Manual page 21

Guided Setup
Guide Setup is a feature which configures automatically
the power source according to a set of input data:

Type of metal sheet

Thickness

Type of joint

Tungsten diameter
Based on this data, the power source will be
automatically configured to get the most suitable
parameter for the configuration.
Guide Setup activation
Guided Setup can be activated in "System Option" then
"Weld Mode Setup".
In "Manual Mode", assistance is deactivated. A push on
knob button will allow to activate it
Guide Setup use
When Guided mode is activated, Home page will be
adjusted by:

Adding list of all inputs data in "Primary Settings"
section.

Preset a defined current value.

Modifying current range ribbon
Primary settings:
To change and configure input parameters press the
knob button and navigate to parameter desired. Then
push knob button to validate.
English
Once parameters are modified, the output welding
current will be automatically adjust to fit with the
application.
Current range ribbon
The machine automatically configures the best current
value. It is also possible to adjust the current around this
value. As soon as the current remains in proper welding
current range for the application,
If the current exceed the proposer welding range, the
ribbon turned into red indicating to the user the current
selectin is not the best one.
19 English