About Launcher - Canon IMAGE FORMULA DR-6010C User Manual

Chapter 3 Basic Operation

About Launcher

To use the Launcher feature, it is necessary to first change the Windows event settings as described
below, and specify an application for each job button.
Note
• By default, all applications supporting the event function are enabled. If you do not change
the event setting before you use the Launcher feature of the DR-6010C, the dialog box
shown below will appear. Select an application from this dialog box or click [Cancel] and
change the event settings.
• Only applications that support the Windows event function can be started using the
Launcher feature of the DR-6010C.
• Some applications may not work correctly if started using the Launcher feature.
Event Settings
This section describes how to change the Windows event settings.
1
Open the [Event settings] dialog box.
1. Click [Start] - [Control Panel] to open the Control Panel.
Note
Under Windows 2000, click the [Start] button and select [Settings] - [Control Panel] to open
the Control Panel, then proceed to step 3.
3-12