Removable Tray - Canon DR-5020 Instructions Manual

Removable tray

Attach this tray when you are scanning small-size documents.
This tray prevents documents from flying out of the tray when they are ejected
from the scanner.
1
Install the removable tray on the center of the eject tray.
The removable tray is held in place by magnets. Align the tray position to
accommodate the length of the document.
Close the eject tray if it is open.
MEMO
2
Set the left and right paper guides for the width of the document
you are going to scan.
Allow a little bit of extra room on both of the guides.
2.3 Preparing for Paper Feed and Eject
31