Getting Started; Opening Your Product; What's Included; Connecting To The Mains - CAMBRIONIX SS15 User Manual

4.Getting Started

This manual provides a reference for end-users who are installing for the first time and using
their hub thereafter. As well as a guide for product safety-related information.
The SS15 is intended to be used in an indoor static environment in which the environment falls
within the tested specifications to provide charge, sync and management functionality. For
information on the environment specifications please see the physical specifications section of
this manual.

4.1.Opening your product

When you have received your product please check the packing slip to ensure all products and
quantities of them are correct before opening. This is to avoid retesting and repackaging any
items which are not required.
When opening the packaging use a suitable method to open the box i.e. do not use a knife. This
is to ensure the product is not damaged.

4.2.What's Included

USB 3.2 Type-A Cable (to provide communication between host system and the hub)
l
SS15 Hub
l
2m Mains power cable (Country specified on order including fuse for UK plugs)
l
Power Supply Unit
l

4.3.Connecting to the mains

Connect the Power Supply Unit (PSU) to the hub using the 4-pin DIN plug. Connect the power
cable to the PSU. Making sure you adhere to local safety regulations, connect the power cable
to the 100 – 250 VAC mains power outlet and switch the hub on using the small power switch
located adjacent to the power input connector on the hub. When the device is switched on, a
red LED will be illuminated. The hub is now ready to charge attached devices.
Periodic inspection should be made to power supply cables and any USB cables for any signs of
damage. If any damage is found then replace damaged cord before further use.
SS15 Page 8 of 30