Tronic TPB 10000 A1 Short Manual page 16

Charging via USB-C port 3
♦ If your mobile device is equipped with USB
Power Delivery 3 .0, you can use a USB-C
to USB-C cable (not included) to connect
the USB-C input of your device to the USB-C
port 3 of the power bank for faster charg-
ing . Charging starts automatically as soon
as the connection is made .
♦ If charging does not start automatically,
press the ON/OFF button 5 once briefly to
start the charging process .
♦ During the charging process, the charge
level LEDs 4 show the current charge level
of the power bank (see table in the section
Checking the charge level) .
♦ To stop charging, disconnect the charging
cable from the mobile device and the power
bank . The charging status LEDs 4 go out
after about 35 seconds .
♦ Optionally, you can press the ON/OFF
button 5 twice in quick succession to turn
off the power bank and the battery level
LEDs 4 .
TPB 10000 A1
GB │ IE │
13 ■