Mercedes-Benz B-Class Owner's Manual page 220

Always make sure that nobody is within
#
the range of the garage door's move-
ment.
Before programming the garage door opener, park
the vehicle outside the garage. Make sure that the
vehicle is switched on but not started.
R R eq equir uirements: ements:
The vehicle has been parked outside the
R
garage or outside the range of movement of
the door.
The vehicle is switched on.
R
The vehicle has not been started.
R
%
The garage door opener function is always
available when the vehicle is switched on. Press and hold button 1, 2
#
wish to program.
Indicator lamp 4 ashes yellow.
% It can take up to 20 seconds before the indi-
cator lamp ashes yellow.
Release the previously pressed button.
#
Indicator lamp 4 continues to ash yellow.
Point remote control
#
1 cm to 8 cm towards button 1,
Press and hold button
#
5 until one of the following signals appears:
Indicator lamp
R
ously. Programming is complete.
Indicator lamp
R
ming was successful. Additionally, syn-
chronisation of the rolling code with the
door system must be carried out.
If indicator lamp
#
green: repeat the procedure.
Release all of the buttons.
#
%
The remote control for the door drive is not
included in the scope of delivery of the garage
or 3 that you
door opener.
Synchr hronising t Sync onising the r
R R eq equir uirements: ements:
The door system uses a rolling code.
R
The vehicle must be within range of the garage
R
door or door drive.
Driving and parking 217
5 from a distance of
2 or 3.
6 of remote control
4 lights up green continu-
4 ashes green. Program-
4 does not light up or ash
he rolling code olling code
217