Power Supply; Carrying - Canon DR-7580 Instructions Manual

Power Supply

• Be sure to connect to an AC 220-240V (50/60 Hz) or AC 120V (60 Hz) power
supply, according to your region's requirement.
• Ensure that the scanner is connected to an independent power outlet. Do not
plug the scanner into an outlet shared with another device. If you use an
extension cable, pay attention to the total amperage of the cable.
• If you are unsure of anything relating to the power supply, contact your service
representative.
• Never place an object on top of the power cord or step on the power cord.
• Never bundle the power cord or wrap the cord around an object, such as a table
leg.
• Do not tug the power cord. When you remove the power cord, grip it by the plug
head.
• Keep the area around the power outlet free of obstacles.

Carrying

Take care when moving the scanner. Two people should hold the scanner firmly
on opposite sides when lifting it.
■ The scanner weighs 55.1 lb (25 kg). Two people must carry the scanner. You may
drop the scanner, or pinch your fingers if you attempt to carry it by yourself.
WARNING
■ When moving the scanner, be sure to turn OFF the power and remove any cables. If
the cables are not removed before moving the scanner, you may damage the plugs or
connectors by forcibly pulling them out.
8