Chapter 1
DR-7580/9080C
◆ Rear View
Air Vent
To avoid overheating and causing a fire, never block the air vents on the rear of the
scanner.
CAUTION
◆ Connectors (Bottom View)
USB Connector
Connect a Hi-Speed USB 2.0
compatible cable. (See p.22.)
14
Connectors
SCSI Connectors
Connect a half-pitch 50 pin (pin type)
SCSI cable. (See p.19.)
Power Cord Connector
Connect the power cord provided with
the scanner to this connector.
DIP Switch
This switch is for setting the SCSI ID
and turning ON or OFF the terminator.
(See p.20.)