Door Opening - GE GTDP301GL Installation Instructions Manual

ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
• Insert the elbow through the rear opening and connect
it to the dryer internal duct.
• Apply duct tape on the joint between the dryer internal
duct and elbow, as shown on page 7.
CAUTION:
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET
PL ATE
(KIT WE1M454)
Connect standard metal elbows and ducts to complete
the exhaust system. Cover back opening with a plate (Kit
WE1M454) available from your local service provider.
Place dryer in final location.
WARNING-
OPENING WITHOUT THE PLATE.
Installation Instructions
NEVER LEAVE THE BACK
CHANGING DIRECTION OF
13

DOOR OPENING

REMOVE 4
HINGE SCREWS.
ROTATE DOOR 180°
AND REINSTALL.
8
REMOVE 4 HOLE PLUGS AND
PLACE THEM IN THE HOLES
ON THE OPPOSITE SIDE.