If Your Engine Stalls While Driving; If Your Vehicle Overheats - Toyota Hiace Owner's Manual

Hide thumbs Also See for Hiace:
Table of Contents

Advertisement

5. Diesel−powered vehicles only:
Charge the discharged battery with
jumper cable connected for approxi-
mately 5 minutes. At this time, run the
engine in the vehicle with the booster
battery at about 2000 rpm with the ac-
celerator pedal lightly depressed.
6. Start your engine in the normal way.
After starting, run it at about 2000 rpm
for several minutes with the accelerator
pedal lightly depressed.
7. Carefully disconnect the cables in the
exact reverse order: the negative cable
and then the positive cable.
8. Carefully dispose of the battery cover
cloths—they may now contain sulfuric
acid.
9. If removed, replace all the battery vent
plugs.
If the cause of your battery discharging is
not apparent (for example, lights left on),
you should have it checked at your Toyota
dealer.
124
If your engine stalls while
driving

If your engine stalls while driving...

1. Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
2. Turn on your emergency flashers.
3. Try starting the engine again.
If the engine will not start, see "If your
vehicle will not start".
CAUTION
If the engine is not running, the pow-
er assist for the brakes and steering
will not work so steering and braking
will be much harder than usual.

If your vehicle overheats

If
your
engine
coolant
gauge indicates over−heating, if you ex-
perience a loss of power, or if you hear
a loud knocking or pinging noise, the
engine has probably overheated. You
should follow this procedure...
1. Pull safely off the road, stop the ve-
hicle and turn on your emergency
flashers. Put the transmission in "P"
(automatic) or neutral (manual) and ap-
ply the parking brake. Turn off the air
conditioning if it is being used.
2. If coolant or steam is boiling out of the
radiator or reservoir, stop the engine.
Wait until the steam subsides before
opening the engine access hole cover.
If there is no coolant boiling over or
steam, leave the engine running.
CAUTION
To help avoid personal injury, keep
the engine access hole cover closed
until there is no steam. Escaping
steam or coolant is a sign of very
high pressure.
temperature

Advertisement

Table of Contents
loading

Table of Contents