Download Print this page

Antec T1 SPORT Assembly Instructions page 4

Gaming chair

Advertisement

Features
BACKREST RECLINE
Pull up on the lever and slowly lean
back until the preferred position is
achieved, then slowly return the lever
to its starting position. Ensure the
lever locks back in place.
Care Instructions
‧ Keep boulies chair tidy by vacuuming its seams with a crevice tool.
‧ Dust regularly using a clean, lint-free, slightly damp soft cloth and wipe the area
clean.
‧ Avoid direct sunlight and keep the chair away from heat sources to protect its
leather.
‧ Clean spills quickly. Blot away with a clean cloth, but do not rub.
‧ Clean the casters by wiping off dirt with a scrub brush. Vacuum out dust caught
inside of the wheels.
‧ For further cleaning, pull off the wheels and wipe them down with a surface cleaner
and a clean rag.
4D ARMRESTS
Press and hold the 1) lever on the
outside of the armrest to adjust
height, 2) inner side button to adjust
sideways, and 3) front button to adjust
front, back, and angle.
MASTER Only
LUMBAR ADJUSTMENT
Turn the knob clockwise to increase the lumber support, anticlockwise to decrease. Do not attempt to turn past the
maximum and minimum.
TILT TENSION
Turn the knob clockwise to loosen
the rocking tension of the chair,
anticlockwiseto tighten. Adjust
according to your weight.
Safety Information & Return/Exchange Policy
The maximum recommended user weight of the Master Series/Ninja
Pro Series is up to 135 kg / 300 pounds, the Elite Series is up to 120 kg
/ 270 pounds.
Don't use boulies chair in an abusive manner. The chair is not liable
for any damages resulting from improper assembly and usage.
The original packaging can be conveniently reused for a boulies chair
return or exchange. noblechairs accepts returns that are properly
packaged.
MULTI-TILT MECHANISM
1) Right lever( while seated): Pull up
to adjust height. 2) Left lever (while
seated): Push down/pull up to lock/
unlock the tilt mechanism.

Advertisement

loading