Advertisement
Chair Installation
Place the Chair Base upside-down on a soft surface , remove
1
the screws on the Chair Base.
Position the Tilt Mechanism and the Cushion Gaskets in the
2
correct direction. Install the Tilt Mechanism by diagonally
tightening the screws into the Chair Base with the Allen Key.
Insert the 5 Casters into the Wheel Base.
3
Push firmly to lock them into place.
Position the Hydraulics into the Wheel Base and place
4
the Hydraulic Sleeve over it.
Align the top of the Hydraulics into the bottom of the
5
Tilt Mechanism, push to lock it into place.
Advertisement
