Canon CANOSCAN 9000F Quick Start Manual page 16

Scanning Film
Using a Film Retainer Sheet
Curled film strips can stick to the platen glass and
cause a pattern of rings called Newton Rings to
appear on the scanned image. If this occurs, scan
using the supplied Film Retainer Sheet as shown in
the diagram.
(A) Scan with the Film Retainer Sheet inserted
beneath the film.
(B) If Newton Rings still appear after following
Instruction (A), turn the film strip over and place
it in the Film Holder with the Film Retainer Sheet
on top so that the film edges are held down for
scanning. Then preview the image in ScanGear
and click the
image before initiating the final scan.
To avoid damaging the film, always place the
glossy side (the side without an illustration)
of the Film Retainer Sheet against the film.
3
Close the document cover.
4
Start MP Navigator EX.
Follow the step 3 in "Try Scanning" on page 9.
5
Click Film.
14
(
Mirror) button to reverse the
(A)
Film Holder
Film Retainer
Sheet
With its glossy side
facing upward, slip the
Film Retainer Sheet
under the film.
(B)
Hold the film edges
down by placing the
Film Retainer Sheet
on top with its glossy
side facing downward.
120 Format Film