Connecting To An External Monitor - Canon SX7 MARKII User Manual

Connecting to an External Monitor

You can display an image from the projec-
tor to an external monitor.
VGA cable
To monitor output terminal
(mini D-sub 15-pin terminal)
Commercial VGA cable
Image input terminal
(mini D-sub 15-pin terminal)
You can connect one external monitor.
The multi-monitor display is not sup-
ported.
The projected image is displayed on
the external monitor.
You cannot output the input signal to
the external monitor if it is DIGITAL
PC.
38
Projector
External monitor
Connecting to AUDIO IN Termi-
nals (SX7 II/X700)
Connect an audio cable to the AUDIO IN ter-
minal corresponding to the input image sig-
nal if you want to use the projector's speaker.
Audio cable
AUDIO OUT terminal
Commercial Audio cable
You can input an audio signal
corresponding to 3 image
input systems.
Connect to the AUDIO IN ter-
minal corresponding to the
type of the input image signal.
for DEGITAL IN/ANALOG IN-1
for ANALOG IN-2
AUDIO IN terminal
The speaker outputs the audio signal
corresponding to the selected image
signal.
Use an audio cable without a built-in
resistor. Using an audio cable with a
built-in resistor turns down the sound.
Connect the audio cable between the
AUDIO OUT terminal and an external
audio-visual equipment if you want to
output the audio signal to the audio-
visual equipment (P68).
The built-in speaker is monaural.
Computer
Projector
SX7 MarkII/X700