Setting Various Function; Setting Auto Setup Function; Selecting The Power Management Mode - Canon SX7 MARKII User Manual

Setting Various Function

Setting Auto Setup Function

[Auto setup]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can select an item you want to enable in the
auto setup function.
System settings
Auto setup
Select [On] or [Off] for the following items if you
want to enable or disable them in the auto setup
function, respectively.
Enables/disables the auto focusing.
Auto focus
Enables/disables the auto keystone
Auto keystone
correction.
Enables/disables the auto input
Auto input
selection.
Enables/disables the auto screen
Auto screen color
color correction.
A confirmation screen appears during
the auto setup so that you can check
which functions are enabled/disabled
(P46, 70).
You can manually adjust each item.
[Auto focus]: [FOCUS] button (P51)
[Auto keystone]: [KEYSTONE] button
(P52)
[Auto input]: [INPUT] button (P48, 71)
[Auto screen color]: Menu function
(P98)
If you select [16:9 D. image shift] for
[Screen aspect], you cannot change
the setting of each item. The auto
setup function will also be disabled.
ANALOG PC

Selecting the Power Management Mode

[Power management mode]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can turn off the lamp or projector automati-
cally for saving power.
System settings
Power management mode
Disables the power management
Off
mode.
Enters
Standby
mode. The projector restarts projec-
tion when a signal is inputted or any
operation button is pressed.
Enters the exit mode and turns off
Exit
the projector automatically.
Press the [OK] button to confirm, and then press
the [MENU] button.
You cannot enable the [Direct Power
on] function if you select [Off].
The [POWER] indicator flashes red
and green when the projector is in the
[Standby] power management mode.
ANALOG PC
the power management
111