Programming Mode - LG RP1329AD1S Owner's Manual

16

PROGRAMMING MODE

PROGRAMMING MODE
1. Programming mode
You can check machine information or change setting on Program setup or Diagnostic test.
There are two methods that you can enter programming mode.
How to enter "Programming mode"
You can enter programming mode only for Idle state
and pause state.
- Card Type
- Coin Type
3) Turn on/off the toggle switch at the back of the coin
box.
- OPL/Coin Type
same time.
3) Push the Start button.
Coin Vault
Coin type
NOTE
(For more information refer to SETUP mode's
".
"
Insert debit card
Card type
How to use button
You can change Dryer vend price, cycle time and Cycle
parameters, etc.
Press button
Med Temp.
Low Temp.
Start
/ .)
Description
Move to upper level
Move to the mode in the
same level (+)
Move to the modes in the
same level (-)
-
Enter the selected mode
OPL type
.