Installation On Pitched Roofs With Rafter Hooks; Fitting Rafter Hooks - Viessmann VITOSOL 200-T Installation Instructions Manual

Installation on pitched roofs with roof hooks
Continue with chapter "Hydraulic con-
nections" (see page 61).

Installation on pitched roofs with rafter hooks

Fitting rafter hooks

Rafter hooks are suitable for vertical
and horizontal collector installation.
1
1 Rafter hook
2 Support bracket
3 Mounting rail for vertical installation
4 Mounting rail for horizontal instal-
lation
■ Version I:
Fitting rafter hook 1 onto counter bat-
ten B with support bracket 2
■ Version II:
Fitting rafter hook 1 directly onto raf-
ter A
■ Trim the roof tiles with an angle
grinder, for example by removing drip
tabs.
16
2 3
2 3
■ Vertical installation (vacuum tubes
vertical, relative to the roof ridge), see
from page 18
■ Horizontal installation (vacuum tubes
parallel, relative to the roof ridge), see
from page 25
4
8 0
2 3
!
Please note
Take care to avoid breaking
tiles.
The rafter hook must not be posi-
tioned on top of the roof tiles.
Observe the specified dimen-
sions.
(cont.)
8 0