Storing The Machine; Maintenance And Care - Stihl TS 480i Instruction Manual

English

20 Storing the Machine

If the machine is to remain out of use for approx.
3 months or more
► Drain and clean the fuel tank in a well ventila‐
ted place
► Dispose of fuel in accordance with the regula‐
tions and having regard for the environment

21 Maintenance and Care

The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than
normal or under difficult cutting conditions (exten‐
sive dust, etc.).
Complete machine
Controls
Manual fuel pump (if
present)
Fuel pickup body in fuel
tank
Fuel tank
V-ribbed belt
Air filter (all filter compo‐
nents)
Cooling air intake slits
Cylinder fins
Spark arresting screen in
muffler
Electronic water control
STIHL Injection
Spark plug
1)
STIHL recommends STIHL servicing dealer
30
Visual inspection (con‐
dition, leaks)
Clean
Function test
Check
Have repaired by a
1)
specialist dealer
Check
replace
Clean
Clean / re-tension
replace
change
Clean
Have cleaned by
1)
dealer
Check if installed
1)
Check or replace
Check
Have it repaired by a
1)
specialist dealer
Check idle adjustment
– abrasive cutting
wheel must not rotate
Have it repaired by a
1)
specialist dealer
Adjust electrode gap
Replace after 100
operating hours
► Remove the abrasive wheel
► Thoroughly clean the machine
► Store machine in a safe and dry place. Protect
against unauthorized use (e. g., by children)
X X
X
X X
X
Only if there is a noticeable loss of engine power
X
X
x
X X
20 Storing the Machine
X
X
X X
X
X
X
X
X
x
x
X
X
0458-753-8321-C
X
X
X
X