BMW 740i Owner's Manual page 169

en the two screws (arrows) and
ve the cover.
tery type and its installation po-
e stamped into the base of the
compartment.
turn used batteries to a recy-
ng point or to your authorized
enter.<
All manuals and user guides at all-guides.com
New transmitter
If you place a new transmitter into ser-
vice (either a replacement or an addi-
tional transmitter), it must be initialized:
1 Enter the vehicle and close the
driver's door
2 Briefly (max. 5 seconds) turn the
ignition key to position 1 in the steer-
ing lock, then return it to position 0
3 Remove key; press and hold down
button 1 (see illustration). Maintain
pressure on button 1 while rapidly
pressing button 2 three times in suc-
cession within a period of 10 seconds