BMW 740i Owner's Manual page 109

ntrol
*
Canadian residents:
uring programming, your hand-
nsmitter may automatically stop
ting after two seconds, which
be long enough to program the
niversal Transmitter. If you are
mming from one of these hand-
nsmitters, the Universal Trans-
light may begin to flash in a se-
ouble-blinks. If this occurs,
e to hold the button on the Uni-
ransmitter while you reactivate
nd-held transmitter. You may
repeat this function several
hile programming.<
fore programming, read the
ser information" section on
10.<
al hand-held transmitter
f this symbol is present on the
packaging or in the instructions
of the original hand-held trans-
t may be assumed that this
eld transmitter is compatible
Integrated Universal Remote
All manuals and user guides at all-guides.com
Checking for the conversion code
To determine whether the original
hand-held transmitter is provided with a
conversion-code system, you may ei-
ther read the instructions for the original
hand-held transmitter or program a
channel key as described on page
(left-hand column under "Program-
ming").
Then press and hold the programmed
channel key of the Integrated Universal
Remote Control. If the indicator lamp of
the Integrated Universal Remote Con-
trol flashes for two seconds and then
comes on steadily, the original hand-
held transmitter is provided with a con-
version-code system. With a conver-
sion-code system, program the channel
keys as described on page
hand column under "Programming a
hand-held transmitter with conversion
code").
If you have additional questions,
please consult your BMW center
or call 1-800-355-3515.<
109
109 (right-