BMW 740i Owner's Manual page 110

ontrol
*
d the original hand-held transmit-
toward the receiver 3 a maximum
inches (5 cm) away
ss the transmission key of the
inal hand-held transmitters
ow 2) and the desired channel key
he Integrated Universal Remote
ntrol (arrow 1) simultaneously. Re-
se both keys as soon as the indi-
or lamp flashes rapidly
program other original hand-held
smitters, repeat steps 3 and 4.
orresponding channel key is now
ammed with the signal of the orig-
and-held transmitter.
All manuals and user guides at all-guides.com
Programming a hand-held
transmitter with conversion code
Read and comply with the safety
precautions on page
When programming the Integrated Uni-
versal Remote Control, consult the in-
structions for the specific device. For
using the Integrated Universal Remote
Control with a conversion-code system,
note the following supplemental pro-
gramming instructions:
A second person facilitates pro-
gramming of the Integrated Uni-
versal Remote Control.<
1 Program the Integrated Universal Re-
mote Control as described previously
under "Programming"
2 Press and hold the programming key
on the receiver of the device for ap-
proximately two seconds until the
programming light on the device
comes on
3 Press the desired channel key of the
Integrated Universal Remote Control
three times.
If you have additional questions,
please consult your BMW
109n
108.<
center.<