Listening to FM Radio
Setting the Reception
When you select stations using the "FM Auto Preset" function ( page 52) or
"Manual Tuning" ( page 53), the FM receiver may receive many unwanted
broadcast stations because the reception is too sensitive. In this case, set the
reception to "Scan Sens Low. " "Scan Sens High" is set by default.
Press and hold the
screen until the HOME menu appears.
Press the / button to select
the button to confirm.
Press the / button to select "Scan Sens>," and then press
the button to confirm.
Press the / button to select "Scan Sens Low," and then
press the button to confirm.
To set the reception sensitivity back to the default
Select "Scan Sens High" in step
To return to the previous menu
Press the
/HOME button
/HOME button while displaying the FM radio
/HOME button.
(Scan Sens)
button
/ button
(Settings), and then press
, and press the button to confirm.