Accessories; K350 Adapter Kit; K350-1Adapter Kit - Lincoln Electric LN-23P Service Manual

C-2
OPTIONAL EQUIPMENT
GUN AND CABLE ASSEMBLIES
Type K-355-10*
Length:
Rated Welding
Current: 250 Amps
Duty Cycle
Electrode Sizes .068, .072, 5/64 .068, .072, 5/64
Reduced Speed
Switch
Sizes
Nozzle Angle
Weight
* Recommended for pipe welding applications.
All guns include one each .068/.072 tip, 5/64 tip, and a thread protector**. The K-264-8 also includes an insulated guide for
3/4" to 1-1/2" stickout. The K-361-10 also includes an insulated guide for 2" stickout.** The K-406 includes an insulated
guide for 2" to 1" stickout, but no thread protector.

K350 ADAPTER KIT

Required when using the LN-23P on any constant
voltage power source. Either one or two LN-23Pʼs can
be connected to the Adapter. If two LN-23Pʼs are con-
nected, they can be set for different procedures. The
Adapter circuit is interlocked so only one LN-23P can
be used at a time.

K350-1Adapter Kit

The K350-1 is similar to the K350 but has a 14 pin
connector on the end of the control cable that will
interface with any Lincoln power source that utilizes a
14 pin connector for control.
Note: A K350 Adapter Kit is not required when con-
necting a LN-23P / K316l-2 (8pin connector) to
a V350-Pipe, V350PRO or V450PRO.

ACCESSORIES

All manuals and user guides at all-guides.com
K-345-10*
10 feet 10 feet
350 Amps
60% 60%
Std. Std.
5/64 5/64
90E 90E
7.0 lbs. 89.3 lbs.
K-264-8 K-361-10
8 feet 10 feet
250 Amps 350 Amps
60% 60%
068, .072, 5/64 068, .072, 5/64
None None
5/64 5/64
62E 62E
5.2 lbs. 7.5 lbs.
K-276 ENCLOSED WIRE REEL SUPPORT
Bolts to the LN-23P frame for feeding wire from stan-
dard 50 lb. Innershield coils. Includes enclosure and
door to keep the dirt out; also includes wire reel brake
assembly.
LN-23P
C-2
K-406*
Linconditioner Gun 10 ft.
(15 ft. Exhaust Hose)
350 Amps
60%
068, .072, 5/64
Std.
5/64
68E
16.0 lbs.