Table of Contents
Advertisement
General Information
GEARBOX
FIG. 45: Check the level of the lubricant in the gearbox
(1) after every 100 hours of operation.
Change the oil in the gearbox after the first 50 hours of
operation and then every 250 hours after that.
3
The dipstick (2) and the fill plug (3) are located in the top
of the gearbox. Clean the area around the dipstick and
2
the fill plug before checking or adding lubricant. Use an
Allen wrench to remove the dipstick.
1
Check the oil level with the tongue of the baler at the
correct ASABE drawbar height. See Tractor Drawbar and
PTO Dimensions in the Operation section for the
dimension.
j325009
To check the level of lubricant in the gearbox, remove the
FIG. 45
dipstick and wipe the dipstick clean. Insert the dipstick
back into the hole and permit the threads to just contact
the gearbox momentarily. Pull the dipstick out of the hole
and check the level of the lubricant. The level must be
between the mark and the end of the dipstick.
Add lubricant as necessary. See the Specifications
section for the correct type and quantity of lubricant. DO
NOT use a lighter grade than specified
The drain plug is located on the bottom of the gearbox.
Clean the area around the drain plug before removing the
drain plug.
01-26
4283407M1
Hide quick links:
Advertisement
Table of Contents
