General Notes; Installation - WAGNER PC430 Operating Manual

Large volume container
Translation of the original operating instructions

General notes

Before using this accessory for the first time read through
these Operating Instructions and also familiarise yourself
with the Operating Instructions for the paint spraying
unit. The safety instructions for the paint spraying unit
apply to this accessory.
Area of application
The large volume container makes the job of processing larg-
er volumes of coating material a convenient one without the
need to permanently change container.
The large volume container is suited to the following Wagner
models (as per March 2010):
Model designation
PC430
PS 3.25
PS 30, PS 34, PS 3.29, PS 3.31,
PS 3.34
PS 36, PS 3.39
SF 27, SF 31, SF 7000
HC 940, HC 960
Only materials which can be processed
according to the relevant unit's operating
instructions may be used.
Technical Data
Maximum container volume:
Max. tyre pressure:
Dimensions (L x W x H):
Weight (empty):
Order no. of the accessories
needed for connection
2312 159
2312 155
2312 156
2312 157
2312 158
2312 160
100 l
4.1 bar
1100 x 640 x 1065 mm
26.8 kg
Description (Fig. 1)
1. Container
2. Lid
3. Grab handle
4. B coupling
5. Ball cock
6. Brake

2
1

Installation

Only install container on level ground.
Slide the brake (6) between the wheel spokes to prevent the
container from slipping away.
Transportation
Only transport empty containers up and
down stairs. If containers are filled, there
is a risk of tipping and falling due to their
weight.
Attention
Tilt empty containers backwards using the handle and move
by sliding or pulling.
The container must not be transported
with a crane.
Attention
GB
3
5
4
6
5