LG 50PM4700 Service Manual page 10

(3) Put on the 3D Glasses, And block the right side of Glasses
(LEFT:OPEN[TEST], RIGHT:CLOSED)
And check the middle sides of picture , RED -> normal ,
others -> abnormal
(4) Put on the 3D Glasses, And block the right side of Glasses
(LEFT:CLOSED, RIGHT:OPEN[TEST])
And check the middle sides of picture , BLUE -> normal ,
others -> abnormal
5.7. Option Selection per country
5.7.1 Overview
■ Option selection is only done for models in Non-USA North
America due to rating
■ Applied model: PU22A Chassis applied USA Model(Not
Canada, Mexico)
5.7.2. Method
(1) Press ADJ key on the Adj. R/C, then select Country Group
Menu
(2) Depending on destination, select KR or US, then on the
lower option, select US, CA, MX. Selection is done using
+, - KEY
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
6. USB DOWNLOAD(*.epk file download)
(1) Put the USB Stick to the USB socket
(2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low,
it didn't work.
- But your downloaded version is High, USB data is
automatically detecting
(3) Show the message "Copying files from memory"
(4) Updating is staring.
(5) Updating Completed, The Multi-vision will restart
automatically.
(6) If your Multi-vision is turned on, check your updated
version and Tool option. (explain the Tool option, next
stage)
* After downloading, have to adjust TOOL OPTION again.
1) Push "IN-START" key in service remote controller.
2) Select "Tool Option 1" and Push "OK" button.
3) Punch in the number. (Each of models has their
number.)
4) Completed selecting Tool option.
Tool option 1
Tool option 2
Tool option 3
Tool option 4
Tool option 5
Tool option 6
Tool option 7
- 10 -
50PM4700-DA
33064
780
9039
29294
6741
1689
43
LGE Internal Use Only