Page 1: User Guide
User Guide This is a 「User Guide」 installed on the TV. The contents of this guide are subject to change without prior notice for quality improvement.
Page 2: To❐View❐Program❐Information
❐ ❐ To❐view❐program❐information Wheel(OK)❐➾❐Info. Displays information about the current program and/or current time, etc. ✎ Image shown may differ from your TV. Current time Sat, Jan.1 12:02 AM Prev./Next Ch. Change Schedule PM 2:00 PM 4:30 Program name or external Detailed program information device name (for digital broadcast)
Page 3: To Set Favorite Channels
To set favorite channels ❐ HOME ➾ Settings ➙ CHANNEL ➙ Channel Edit 1 Move to the desired channel on Wheel(OK) button. Channel is selected. 2 Press Set as Favorite. 3 Select the desired favorite channel group. 4 Select Enter. Favorite is set. To use Favorite ❐...
Page 4: Auto Tuning
To set Auto Tuning ❐ HOME ➾ Settings ➙ CHANNEL ➙ Auto Tuning Automatically tunes the channels. ✎ Channels are not registered properly unless the antenna/cable is connected correctly. ✎ Auto Tuning only sets channels that are currently broadcasting. ✎ If Lock System is turned on, a pop-up window will appear asking for password.
Page 5: Manual Tuning
To set channels manually ❐ HOME ➾ Settings ➙ CHANNEL ➙ Manual Tuning Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
Page 6: To Edit Channels
To edit channels ❐ HOME ➾ Settings ➙ CHANNEL ➙ Channel Edit Edits the saved channels. Set as favorite, block/unblock and skip etc. the selected channel.
Page 7: Aspect Ratio
HOME ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Resizes the image ratio to fit a 16:9 screen. Displays high-quality image without loss. Just Scan ✎ In DTV/HDMI/Component (over 720p) mode, Just Scan available. Set by Depending on the input signal, screen aspect ratio changes to 4:3 Program or 16:9.
Page 8 ✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4 : 3 aspect ratio mode for an extended period Take caution when using these functions. ✎...
Page 9 To❐adjust❐pictures❐in❐PC❐input❐mode ❐ ❐ HOME❐➾❐Settings❐➙❐PICTURE❐➙❐Screen❐(RGB-PC) Adjusts picture in RGB-PC mode. Sets the desired resolution. Resolution ✎ Resolution may only be selected when the PC resolution is set to 1024x768, 1280x768 or 1360x768. Auto Optimizes picture. Configuration Position/Size/ If screen size or location is distorted, user can directly adjust Phase the screen size and position.
Page 10 To❐set❐PC❐resolution ❐ ❐ 1 Right-click on the desktop of PC and select 「Properties」. 2 Click on 「Settings」 and refer to supported formats to set the resolution. 3 Select 「Advanced → Monitor → Monitor Settings」 on the setting window. Refer to supported formats to select the optimal vertical frequency. ✎...
Page 11 ❐ ❌ Formats❐Supported Horizontal Vertical PC Input Mode Resolution Frequency (KHz) Frequency (Hz) 640x350 31.468 70.09 720x400 31.469 70.08 HDMI 640x480 31.469 59.94 RGB-PC 800x600 37.879 60.31 1024x768 48.363 60.00...
Page 12: Quick Menu
HOME ➾ Quick Menu ➙ AV Mode Views the TV with the best picture / audio optimized for different AV modes. Views with the value set at the picture / sound menu. Cinema / Optimizes picture and audio settings for movies. ꔧ...
Page 13 To adjust pictures with Picture Wizard ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Wizard Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for the optimum picture quality without expensive pattern devices or help from a specialist.
Page 14: Picture Mode
To select Picture Mode ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Mode Selects the picture mode optimized for the viewing environment or the program. Heightens contrast, brightness, and sharpness to display Vivid vivid images. Displays images in standard levels of contrast, brightness, Standard and sharpness.
Page 15 Cinema/ Displays the optimum picture for movie, game and photo (still ꔧ Cinema/ image). Game/Photo [ꔧ Cinema : Depending on model] Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF- certified and provided for picture tuning experts.
Page 16 To fine-tune picture mode ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Contrast/ Brightness/Sharpness/Color/Tint/Color Temp. Selects the desired Picture Mode first. Adjusts the difference between bright and dark regions of the Contrast screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark.
Page 17 Tint Adjusts the red/green color balance. Color Temp. Adjusts the overall tone of colors to hot or cool. ✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
Page 18: Advanced Control
To set advanced control ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Advanced control/ Expert Control For each picture mode, screen can be calibrated; or for a special screen, picture settings can be adjusted. Selects the desired Picture Mode first.
Page 19 Provides a crystal-clear picture by improving the details Super Resolution in an area that has a blurry or unclear picture. Sets the gradation curve according to the output of Gamma picture signal in relation to the input signal. Color Gamut Selects the range of colors that can be expressed.
Page 20 Adjusts the overall tone of the screen as desired. White Balance In Expert mode, detailed fine-tuning can be set via Method / Pattern and the like. This is a function used by experts when they adjust colors with test pattern of six colors (Red/Green/Blue/ Color Management Cyan/Magenta/Yellow) without affecting other color System...
Page 21 To set additional picture options ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option Adjusts detailed setting for images Noise Reduction Reduces screen noise in the video. Adjusts the brightness or darkness of the screen to fit the Black Level black level of the picture input using the screen's degree of darkness (black level).
Page 22 To reset Picture Mode ❐ HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Reset Resets the values customized by the user. Each picture mode is reset. Select the desired picture mode.
Page 23 HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion Corrects images to display smoother motion sequences. Smooth De-Judder value is set at 3. Clear De-Judder value is set at 7. De-Judder can be set manually. User •...
Page 24 To❐use❐Sound❐Mode ❐ ❐ HOME❐➾ Settings❐➙❐SOUND❐➙❐Sound❐Mode Optimizes TV audio to the selected sound mode. Standard Suitable for all types of video Music/Cinema/Sport/ Sets audio optimized for a specific genre. Game Delivers distinct voices with rich bass and clear, Vivid high-pitched sounds. Adjusts the volume to the desired level using the User User Setting...
Page 25 To❐fine-tune❐the❐volume ❐ ❐ HOME❐➾ Settings❐➙❐SOUND❐➙❐User❐EQ❐ Sets Sound Mode User Setting first. 100 Hz / 300 Hz / 1 kHz/ Sets EQ by manually adjusting sound bands. 3 kHz / 10 kHz Reset Resets previously changed equalizer value.
Page 26: To Set Volume Mode
To set Volume Mode ❐ HOME ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Sets Auto Volume to On. Different volume outputs from channel to channel. They are then automatically adjusted Auto Volume for convenient TV watching when, clicking through different channels.
Page 27: To Use Sound Optimizer Function
To use Sound Optimizer function ❐ HOME ➾ Settings ➙ SOUND ➙ Sound Optimizer Allows optimized sound for individual TV installation. Normal General sound mode Wall Mount Type Optimizes sound for a wall-mounted TV. Stand Type Optimizes sound for a stand-mounted TV.
Page 28 HOME ➾ Settings ➙ SOUND ➙ Virtual Surround LG's proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎ When Clear Voice II is set to On, Virtual Surround cannot be selected. To use Clear Voice II feature ❐...
Page 29 To set AV Sync ❐ HOME ➾ Settings ➙ SOUND ➙ AV Sync. Synchronizes unmatched video and audio. Select AV Sync. to synchronize audio output (TV speaker or SPDIF) with the video. Adjusts the sync of the sound from the TV's internal speakers. TV Speaker The "-"...
Page 30: Sound Setting
Outputs broadcasting signals or the audio of an external Bypass device without audio delay. Audio may be output before video as it takes time to process video input into the TV. To use ARC mode ❐ HOME ➾ Settings ➙ SOUND ➙...
Page 31 Even when the connected ARC-supported external audio device is turned on, audio output is not processed through the external audio device’s speakers. When an ARC-supported external audio device is turned on, audio output is automatically processed through the external audio device’s speakers.
Page 32 To adjust audio balance ❐ HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Balance Adjusts left/right audio balance.
Page 33: To Use Tv's Speakers
To use TV's speakers ❐ HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ TV Speaker When listening to the speakers on the external audio devices connected to TV such as home theater, TV speaker may be turned off. When there are SIMPLINK connected home theater devices, selecting TV Speaker will automatically...
Page 34 To use Digital Sound Out ❐ HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Digital Sound Out Sets up Digital Sound Out. Item Sound Input Digital Sound output MPEG Dolby Digital Dolby Digital Auto Dolby Digital Plus Dolby Digital HE-AAC Dolby Digital...
Page 35: Input List
To❐select❐external❐input ❐ ❐ HOME❐➾ Input❐List Selects external input. INPUT❐LIST Selects speaker. TV Speaker Selects input. Component HDMI1 HDMI2 Sets SIMPLINK. Change Device Name SimpLink Setting Edits the name of external device connected to external terminal.
Page 36: To❐Use❐Simplink
To❐use❐SIMPLINK ❐ ❐ SIMPLINK allows users to control and manage multiple multimedia devices using the convenient TV remote control and SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with SIMPLINK device's HDMI output terminal using HDMI cable. For home theater units with SIMPLINK function, connect HDMI terminals as above and use an optical cable to connect Optical Digital Audio Out from the TV to Optical Digital Audio In of the SIMPLINK device.
Page 37 ✎ This function works only on devices with the SIMPLINK logo ( Make sure that the external device has a SIMPLINK logo. ✎ To use SIMPLINK function, use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control feature added) and No. 13 pin connected for information exchange between devices.
Page 38 ❐ ❌ Explanation❐on❐SIMPLINK❐features❐❐ Play the multimedia device on the TV instantly without Direct Play extra steps. Select Select the desired device through the SIMPLINK menu and multimedia instantly control it from the TV screen. device. Disc playback Manage the multimedia device with the TV remote control. Turning the TV off with Auto Power function On in Power off all SIMPLINK setting will turn the power off on all SIMPLINK-...
Page 39 If the Auto Power function is set to On in the SIMPLINK Sync Power on settings, turning on a SIMPLINK device will turn the TV on. Speaker Selects speaker on the home theater unit or TV.
Page 40 HOME ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. TV sensor detects the ambient lighting and automatically Intelligent Sensor adjusts the screen brightness. Turns off the Energy Saving mode. Minimum/ Medium/ Applies the pre-set Energy Saving mode. Maximum Screen is turned off and only sound is played.
Page 41 To use Sleep Timer ❐ HOME ➾ Settings ➙ TIME ➙ Sleep Timer Turns off the TV after a prescribed number of minutes. To cancel the Sleep Timer, select Off.
Page 42 To set current time ❐ HOME ➾ Settings ➙ TIME ➙ Clock Checks or changes the time while watching TV. Synchronizes the TV clock to the digital time information sent Auto by the TV station. Sets the time and date manually if the auto setup does not Manual correspond to the current time.
Page 43 To set the TV to turn on and off automatically ❐ HOME ➾ Settings ➙ TIME ➙ On Time/Off Time Sets On/Off time. Select Repeat to discontinue On Time/Off Time. ✎ To use On Time/Off Time, set the current time correctly. ✎...
Page 44: To Set Password
To set password ❐ HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎ The initial password is set as 「0000」.
Page 45 To lock system ❐ HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is Block Channel blank and the audio is muted.
Page 46 [Depending on model] Blocks the movies that are only broadcasted on the TV and contain inappropriate contents, based on the Motion Picture Association of America (MPAA) rating. • G : (General audiences) All ages admitted • PG : (Parental guidance suggested) Some material may Movie Rating not be suitable for children •...
Page 47 [Depending on model] Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. TV Rating- • Age : TV-Y (All children, including children from ages Children 2-6), TV-Y7 (Directed to older children, suitable for children age 6 and above)
Page 48 Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). ✎ The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children. • Age : TV-G (General audience, suitable for all ages) TV-PG (Parental guidance suggested, containing material TV Rating- that are unsuitable for younger children)
Page 49 [In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources.
Page 50 To set password ❐ HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎ The initial password is set as 「0000」.
Page 51 To lock system ❐ HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Blocks the channels that contain inappropriate contents for children. The channels can be selected but the screen is Block Channel blank and the audio is muted.
Page 52 [Depending on model] Selecting Canadian English rating system. • E : Exempt • C : Children TV Rating- • C8+ : Children eight years and older English • G : General programming, suitable for all audiences • PG : Parental Guidance •...
Page 53 [Depending on model] Selecting Canadian French rating system. • E : Exempt • G : General • 8ans+ : General-Not convenient for little children TV Rating- • 13ans+ : Not convenient for children of 13 years and French younger • 16ans+ : Not convenient for children of 16 years and younger •...
Page 54 [In Digital mode Only] Downloadable This function operates only when TV has received Region5 Rating Rating data. The name of the rating option may differ. Input Block Block the input sources.
Page 55 HOME ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Selects a screen menu language. Language [In Digital Mode Only] Audio Selects the desired language when watching digital Language broadcasting containing several audio languages. Select the language to make voice search.
Page 56 HOME ➾ Settings ➙ OPTION ➙ Caption View subtitles when the TV station provides subtitled programing. Program subtitles work only on digital/analog broadcasts or external input. Change Caption and select caption setting. CC 1-4 (Closed Captioning) / Text 1-4 Text 1-4 Displays the audio portion of a TV program as text on the TV screen.
Page 57 Set up the size and color of the subtitles on Digital Option. Please Digital select Set by Program or Custom. Option Select Custom to adjust minute options such as the subtitles’ size and color.
Page 58: To Register The Magic Remote Control
To register the Magic Remote Control ❐ To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows: 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV.
Page 59: To Re-Register The Magic Remote Control
To re-register the Magic Remote Control ❐ 1 Press the HOME BACK buttons at the same time for about 5 seconds. 2 Point the remote control at the TV and press Wheel(OK) button for about 5 seconds. ✎ Press the BACK button while pointing the remote control at the TV for five seconds to reset and re-register it.
Page 60: To Set The Pointer Of The Magic Remote Control
To set the pointer of the Magic Remote Control ❐ HOME ➾ Settings ➙ OPTION ➙ Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Chooses from different shapes of the pointer.
Page 61 ✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎ If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control.
Page 62 ✎ Electronic devices nearby may cause communication interference. Devices such as microwave oven and wireless LAN use the same frequency range (2.4 GHz) as the Magic Remote Control, which may interfere with the remote control. ✎ The Magic Remote Control may be broken if dropped or damaged in any other way.
Page 63 To use the pattern gesture function ❐ Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. ✎ It may not work when certain windows are open.
Page 64 To change TV mode ❐ HOME ➾ Settings ➙ OPTION ➙ Mode Setting Selects Home Use Store Demo. For use in the home, select Home Use. Store Demo is for store display.
Page 65: Ism Method
To use the ISM Method ❐ HOME ➾ Settings ➙ OPTION ➙ ISM Method This function removes image sticking which is caused by the prolonged display of static images. • Normal: Minimizes image sticking by gradually lowering the brightness when displaying static images and by increasing the brightness when displaying moving images.
Page 66 • Color Wash: Removes image sticking by moving every pixel in a certain pattern on the screen for a specific period of time. Please use this function to remove temporary image sticking. ✎ Image sticking is commonly known in plasma TV when it displays static images for a long time.
Page 67: Initial Setting
To return to initial settings ❐ HOME ➾ Settings ➙ OPTION ➙ Initial Setting Returns to initial default mode by deleting all user settings. Once initialization is completed, the TV will turn off and then back on. ✎ If Lock System is turned on, a pop-up will be prompted to ask for password.
Page 68: Using The Home Screen
News Sports Viral Video -1 MBC HD July 4 8:30 pm Monster Ghost Abata Photo Game Thanks My Boy My Apps My Apps Quick Menu Input List Settings Search Internet LG Smart... Program Guide Media Link Smart Share User Guide...
Page 69 To❐use❐and❐edit❐MY❐CARD ❐ ❐ HOME❐➾❐MY❐CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or...
Page 70: To❐Use❐My❐Apps
Select My Apps to check apps pre-installed apps and apps you have downloaded. My Apps Input List Settings Search Internet LG Smart... Program Guide Media Link Smart Share Quick Menu User Guide Select the desired app to run.
Page 71: To❐Edit❐Items❐In❐My❐Apps
To❐edit❐items❐in❐My❐Apps ❐ ❐ HOME❐➾❐My❐Apps❐➙❐Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎ On models equipped with the Magic Remote Control, you can move apps or delete them by selecting and then dragging them.
Page 72 ❐ ❐ HOME❐➾❐Settings❐➙❐OPTION❐➙❐Smart❐TV❐Setting Sets many Smart TV-related settings and manages IDs. Changes the Country Setting on the Smart TV. Smart TV Country Receives Premium service and LG Smart World of the desired country. Premium Version Displays Premium service version. ID List Checks and delete IDs signed in to TV.
Page 73 A wireless or wired network connection is necessary to use the Smart TV features. Once the network connection is established, Premium Content, LG Smart World, DLNA, and more are available. Network❐connection❐by❐one-click ❐ ❐ It’s easy to connect to a wired/wireless network.
Page 74 To❐connect❐network❐through❐Set❐Expert ❐ ❐ HOME❐➾❐Settings❐➙❐NETWORK❐➙❐Network❐Connection Used in special circumstances such as in offices (For example, when a static IP is needed). 1 Select a network connection either through Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods.
Page 75 Connects easily by typing in the PIN on the web site of the WPS-PIN desired wireless AP. Connects directly to via a wireless-enabled PC or mobile Ad-hoc phone.
Page 76 To❐use❐Wi-Fi❐Screen❐function ❐ ❐ HOME❐➾❐Settings❐➙❐NETWORK❐➙❐Wi-Fi❐Screen❐Share This TV supports Wi-Fi Direct and WiDi wireless connections. It also supports Wi-Fi Screen Share Smart Share. Use this menu to set up these types of connections. 1 Set Wi-Fi Screen Share to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device that you want to connect to.
Page 77 OFF, disconnect and reconnect it, and then turn the power on to solve the problem. ✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. ✎ The network connection may not work properly because of network settings...
Page 78 ✎ DSL service must use the DSL modem; and cable service must use the cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.) ✎...
Page 79 ✎ The access point device must support wireless connections and wireless connection feature must be enabled on the device to have AP (access point) connection. Contact the service provider for availability of wireless connections on the access point. ✎ Check SSID and security settings of the AP. Refer to the appropriate documentation for SSID and security settings of the AP.
Page 80: To Use Smart Share
To use Smart Share™ ❐ HOME ➾ Smart Share Provides photo/music/video files on the TV by connecting a USB or home network (DLNA, Media Link). SMART SHARE Displays photo/music/video files on all devices connected to TV. PHOTO VIDEO REC OR DED TV Settings Connecting Guide...
Page 81: To Control Movie Playback
To control movie playback ❐ Controls playback and sets options while viewing movies. Selects the desired point and playback. Stops playback and returns to the list. Option List Playback Controls Sets Options. Changes to 3D mode.
Page 82: To Control Photo View
To control photo view ❐ Controls playback and sets options while viewing pictures in full screen. ✎ For 3D pictures, the Slide Show Effect does not work even when the Slideshow function is enabled. Slideshow Option List Displays photos as a Stops playback and returns slideshow.
Page 83: To Control Music Playback
To control music playback ❐ Controls playback and sets options while playing music. Selects the desired point and plays. Returns to the list. Option List Playback Controls Sets options.
Page 84: To Set Smart Share™ Related Functions
To set Smart Share™ related functions ❐ HOME ➾ Smart Share ➙ Settings Changes settings related to Smart Share content play. ❌ Advanced Setting Changes the name that appears when searching for the TV TV Name from other devices. Network Status Checks the network connection.
Page 85 Auto Play on Accepts/Rejects Content transferred from other devices. Receive Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www. divx.com/vod. DivX VOD ✎ When using the DivX Registration Code of another device, the rented/purchased DivX file cannot be played.
Page 86 ❌ History To delete contents history, press button below. Use the contents at Contents Type Linked device menu. ❌ Privacy Check the device that you do not want to open at Newly Added Recently Watched menu.
Page 87 Smart Share™ supporting file ❐ Maximum data transfer rate : 20 Mbps (Mega bit per second) External supported subtitle formats : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) Internal supported subtitle formats : XSUB (Supports internal subtitles generated from DivX6)
Page 88 ❌ Video Supported Codec Maximum: 1920 x 1080 @30p Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profile .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Video Motion Jpeg .divx .avi MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Audio Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS .mp4...
Page 89 Extension Codec Video H.264/AVC .mkv Audio HE-AAC, Dolby Digital Video H.264/AVC, MPEG-2, VC-1 .trp MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) Audio Dolby Digital, Dolby Digital Plus, AAC Video MPEG-1, MPEG-2 .vob Audio Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM Video MPEG-1 .mpg...
Page 90 ❌ Available music file File type Item Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2, Layer2, Layer3...
Page 91 ❌ Available photo file File type Item Profile SOF0: baseline Available file SOF1: Extend Sequential type SOF2: Progressive 2D(jpeg, jpg, jpe) Minimum: 64 x 64 3D(jps) Maximum: Photo size Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Available file type 4:3 size:...
Page 92 Caution for playing video ❐ ✎ Some subtitles created by users may not work properly. ✎ The video and subtitle files should be placed in the same folder. In this case, you must assign the same names for the video and subtitle files for proper display.
Page 93 ✎ Video files created by some encoders may not be played back. ✎ Video files in formats other than the ones specified here may not be played back. ✎ Playback of video files stored on the USB device that do not support High Speed, may not work properly.
Page 94: To❐Connect❐A❐Dlna-Authenticated❐Smartphone
DLNA stands for Digital Living Network Alliance, which allows users to access video/music/photo files stored in a PC or server and enjoy them on TV via home networking. To❐connect❐a❐DLNA-authenticated❐Smartphone ❐ ❐ TV and the smartphone should be on the same network. 1 Enable Wi-Fi on the smartphone.
Page 95: To❐Connect❐A❐Dlna❐Dmr❐(Digital❐Media❐Renderer)
To❐connect❐a❐DLNA❐DMR❐(Digital❐Media❐Renderer)❐ ❐ ❐ With Windows 7 PC operating system or DLNA-certified device (e.g. mobile phone), music/videos/photos may be played on the TV without installing a separate program 1 Configure the TV and PC on the same network. Configure Windows 7-installed PC on the network.
Page 96 1 Configure the TV and the PC on the same network. TV and each device should be connected through a single access point to enable DLNA and Media Link service. 2 Install Nero MediaHome 4 on PC from the web site (http://www.lg.com). Before installation, close all running programs including firewall and Anti- Virus programs.
Page 97 3 Indicate files/folders to share through Nero MediaHome 4 Essentials installed on PC. 1. Run "Nero MediaHome 4 Essentials" installed on PC. 2. Select folder items to share. 3. Configure the shared folder and click "Start Server." Server starts. ✎ If the shared folder does not appear on TV, click the Local Folder tab and search again.
Page 98 ❐ ❌ PC❐requirements❐for❐installing❐Nero❐MediaHome❐4❐Essentials❐ program: • WindowsⓇ XP (Service pack 2 or later), Windows VistaⓇ, WindowsⓇ XP Media Center Edition 2005 (Service pack 2 or later), Windows ServerⓇ 2003 (Service pack 1 or later) • WindowsⓇ 7 Home Premium, Professional, Enterprise or Ultimate (32- and 64-bit) •...
Page 99 • CPU: 1.2 GHz IntelⓇ PentiumⓇ III or AMD Sempron™ 2200+ processor • Memory: more than 256 MB RAM • Graphic card: more than 32 MB, resolution of at least 800 x 600 pixels and at least 16-bit color settings supported •...
Page 100 ❐ ❌ If❐a❐DLNA❐malfunction❐occurs ✎ If a DLNA feature does not work properly, check network settings. ✎ A 5-GHz access point is needed to view 1080p pictures via DLNA. A 2.4-GHz access point may cause broken images or other problems. ✎ DLNA may not work properly in the wireless network. It is recommended to connect to the wired network.
Page 101 ✎ The DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to access point manual or consult with the manufacturer. ✎ Supported file types may differ depending on the DLNA server environment, even for the file types supported by TV.
Page 102 1 Install the Plex Media Server program on PC/laptop. Visit web site at (http://www.lg.com) and download the Plex program compatible with the operating system you are using. 2 After installing the program, right-click the Plex icon that should be in the computer’s app tray.
Page 103 To❐use❐Media❐Link ❐ ❐ HOME❐➾❐Media❐Link MEDIA LINK Information may be provided in English. If Media Link can see Plex servers on your network, it will automatically connect and will show the folders on the main screen. Sort by server Device Selection PLEX Channels Back Exit...
Page 104 System❐requirements❐for❐installing❐PLEX ❐ ❐ • Minimum requirements PC with at least 1.6 GHz Intel Core Duo Processor and Windows XP SP3, minimum 512 MB of RAM • Recommendations for HD Content transcoding (720p and 1080p) PC with at least 2.4 GHz Intel Core Duo Processor and Windows XP SP3, minimum 2 GB of RAM Supports Windows XP, Vista and Windows 7 •...
Page 105 ❐ ❐ Caution❐for❐using❐Media❐Link ✎ PLEX media server version installed on Mac or PC supports the version of 0.9.1.14 or later. ✎ For the following languages, GUI language is displayed in English and the data being delivered are not displayed: : Thai, Arabic, Persian, Hebrew, Kurdish When replaying video plug-in of a media not supported by the TV, there may be a delay in initial buffering due to extra processing time.
Page 106 ✎ When replaying music clips, there is no support for playing with clip moving. (Same as DLNA.) ✎ When playing high-definition videos through a Wi-Fi connection, there may be delays or improper playback. ✎ The TV may not recognize the computer if the AP settings are not correct. (e.g., When setting the “multicast forward”...
Page 107 To connect USB ❐ Connect a USB storage device (external HDD, USB memory) to the USB port of TV to enjoy the content files stored in the USB device on your TV. To remove a USB storage device, choose the Quick Menu ➙...
Page 108 Caution when using USB storage device ❐ ✎ If USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎ Some USB storage devices may not work or work improperly. ✎ Use only USB storage devices formatted with FAT32 or NTFS File System provided by Windows.
Page 109 ✎ It is recommended to use USB Memory Stick with 32 GB or less and USB HDD with 2 TB or less. ✎ For USB HDD with energy-saving features, turn off and turn on again if it does not work properly. For more information, refer to the user manual of USB HDD.
Page 110 To❐use❐Premium ❐ ❐ HOME❐➾❐Premium This service gives you easy access to a wide variety of content, such as video, news and UCC (User Created Content), at any time, as long as you are connected to a network. For Premium content, specialized country-specific services are offered that take into account regional content, in addition to globally provided content.
Page 111: To❐Use❐Paid❐Content
LG Electronics’ proprietary billing system or that of each content provider. Before using the LG billing system, you will need to sign up for membership and register payment information on TV or the website (www.lgappstv.com) . You can sign up for membership on the login screen on your TV or our website.
Page 112 1 Click Sign In button in upper right corner of Home screen to sign in. 2 Move to the desired Premium service. (For some premium services, separate sign-in is required after signing up for the premium service.) 3 After checking the content’s pricing and service information, click the Purchase button.
Page 113: To❐Reset❐Premium
To❐reset❐Premium ❐ ❐ HOME❐➾❐Settings❐➙❐SUPPORT❐➙❐Initialization❐of❐Premium Premium list, Premium information, country setting, and user sign-in information will be reset. When an error occurs during Premium update, reset will fix the problem.
Page 114 Refer to the web site of each content provider for questions, troubleshooting, or latest information about Content. LG Electronics does not take any legal responsibility for content services and related information including discontinuation of service by the service provider.
Page 115: To❐Use❐Lg❐Smart❐World
To❐use❐LG❐Smart❐World ❐ ❐ HOME❐➾❐LG❐Smart❐World LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy many different apps (for fee or free) including education, entertainment, life and news. Sign in. When you sign in, ID is displayed.
Page 116: To❐Sign❐Up❐With❐Lg❐Smart❐World
To❐sign❐up❐with❐LG❐Smart❐World ❐ ❐ HOME❐➾❐Sign❐In Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select to complete sign-up process.
Page 117 1 Click the Sign In button at the top of the home screen to log in. 2 Select the LG Smart World card. 3 Select an app you want from the list. 4 Check the details of the app, then select the Install button.
Page 118 ✎ You can purchase apps from PC or TV but you must use the TV to install and run them. ✎ If you have insufficient storage space on the TV, you can download apps to a USB storage device connected to the TV’s USB Apps port. Apps stored on a USB device are available to run/delete/move via the My Apps screen.
Page 119: To❐Manage❐My❐Information
To❐manage❐my❐information ❐ ❐ HOME❐➾❐LG❐Smart❐World 1 Sign in. 2 Select the currently signed-in ID at the top of the screen. 3 Select Page. 4 Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
Page 120 Shows basic information about the ID currently signed My Information in. To change your member information, please visit www.lgappstv.com on your PC. Payment Inquiry Views Payment History with the ID you have signed in. Views My Purchased Apps List with the ID you have Purchased Apps signed in.
Page 121 HOME ➾ Internet (Web browser) You can type in a URL manually on TV or visit web sites in the Favorites list. Type in Web addresses here. Add the current page to favorites. Open a new tab. Moves to a previously visited website.
Page 122 ✎ The Internet (Web browser) supports up to Flash 10 but does not support platform-dependent technology like ActiveX. ✎ The Internet (Web browser) only works with pre-installed plug-ins. ✎ The Internet (Web browser) only replays the following media file formats: JPEG / PNG / GIF / WMV (ASF) / WMA / MP3 / MP4 ✎...
Page 123 HOME ➾ Social Center LG Smart TV provides the Social Center app that allows you to communicate via social network services (SNS) such as Facebook and Twitter while watching TV. Using Social Center, you can communicate with friends while watching TV and view comments and pictures posted by your social networking friends at a glance.
Page 124 1 You can sign in with your LG TV account. If you are not a member yet, please sign up first. 2 Select a tab from Facebook, Twitter, Activity or Talk. Some functions are connected with other SNS, so you may need the SNS account to sign into the service.
Page 125 You can communicate via SNS such as Facebook Twitter Twitter while watching TV. With your Facebook account, you can easily see LG Smart TV’s great content recommended by other users. Click a Activity recommended program/show to move to the corresponding 3D World, K-pop, or LG app.
Page 126 ✎ You can easily type using the LG Social Center app on your smartphone when communicating via SNS. The app can be downloaded at the Google Play Store. ✎ The functions of Social Center are subject to change according to TV...
Page 127 Sign up is required to use LG Smart World. Free apps are available immediately after signing up, but you need to register your payment method in order to use paid apps. You can sign up and register payment methods on the TV or on our website (www.lgappstv.com).
Page 128 • If you sign up on your TV, no additional sign-up on the LG I already signed up on website (www.lgappstv.com) is required. TV. Do I need to sign up After signing up on TV, you can sign into the website again at web site (www.
Page 129 Problem Solution • It is possible to register and use more than one ID on one Can each family member • To check the ID registered with TV from HOME ➾ Settings use a different ID with a ➙ OPTION ➙...
Page 130 Problem Solution I purchased an app from • To check purchased apps on TV, sign in and view on the website (www.lgappstv. Purchased Apps menu. com). How can I use it on Select the ID at the top of Home and check the app in Page ➙...
Page 131 • Please check if the TV model supports LG Smart World. Can I use apps provided • The apps provided from LG Smart TV's LG Smart World can from LG Smart TV's LG only be run on LG Smart TV.
Page 132 Problem Solution How can I check the ID • Select the ID at the top of Home and check the currently currently signed in to TV? signed-in ID in My Page ➙ Information. I installed an app on TV. • Select HOME ➾...
Page 133 I forgot password on TV. • If you provide other information than the ID and password What should I do? when signing up on your TV or the LG website (www. lgappstv.com), you can recover your password on the website.
Page 134 Problem Solution • To purchase paid apps, you should have a credit card registered on with LG Smart World website (www.lgappstv. com) or have an account credit. If you do not want your Do I have to save the credit card details to be saved, you may add a credit to payment information to your account before buying an app.
Page 135 Problem Solution • To purchase paid apps, you need to have a credit card registered with the website (www.lgappstv.com). I signed up on my TV, but Also, you can have your credit ready by charging it on the I cannot purchase paid website to purchase them.
Page 136 • If you are already a member, you can still use your existing ID or change it to an email address. • The LG account allows you to sign into all of the LG Smart services with a single ID and password.
Page 137: To❐View❐3D❐Images
To❐view❐3D❐images ❐ ❐ 3D imaging is a technology that utilizes the slight difference in left/right eyes to make the images on TV appear just like real-life 3-dimensional space. 1 Play a 3D-image title or tune to a 3D channel. 2 Press the button to activate 3D.
Page 138 To❐adjust❐details❐of❐3D❐images ❐ ❐ HOME❐➾❐Settings❐➙❐PICTURE❐➙❐3D❐Settings Adjusts various aspects of 3D imaging. Provides the appropriate 3D depth. • 3D Depth : Adjust 3D depth between the 3D Mode foreground object(s) and the background. • 3D Viewpoint : 3D image can be made closer or farther from user.
Page 139 Normal Image View This will down-convert a 3D signal to 2D. 3D Image Correction Switches the left/right images of 3D video. 3D Wizard Optimizes 3D mode with a 3D Wizard menu.
Page 140 Caution❐when❐viewing❐3D❐images ❐ ❐ ✎ When viewing 3D images, it is recommended that the viewer maintain a distance of at least twice the screen's diagonal length. ✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, an additional device such as a set-top box may be required.
Page 141 Warning❐when❐using❐3D❐glasses ❐ ❐ ✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. Improper use of 3D glasses may cause eye injuries. ✎ Do not store 3D glasses in extreme conditions. Exposure to excessively high or low temperatures may deform the lenses.
Page 142 To use MemoCaster ❐ HOME ➾ MemoCaster This function displays user-created content on the TV screen. You can leave messages for your family or set up alarms Simple for specific events in your schedule. You can create your own content using the templates Advanced provided.
Page 143 To use MemoCaster Simple ❐ HOME ➾ MemoCaster ➙ Simple You can display memos on TV screen or set up alarms for specific events in your schedule. ✎ Options • On: Displays a memo when TV is turned on. • Off: Displays a memo at a specified time. Date and Time Notification when Configuration,...
Page 144 To use MemoCaster Advanced ❐ HOME ➾ MemoCaster ➙ Advanced You can create your own content using the templates provided and display it on TV screen. 1 Select a template you want. Select Text/LED to change the template mode. 2 Edit images and text. The area where the picture will be shown.
Page 145 The area where text will be shown, Enter your message. Option Set the background color, font color, and font size. History Import the text recently used. Effect Add animation or LED effect to the content you created. Play Set the start time, end time or weekly repeat of the memo to Setup be displayed.
Page 146 3 Select Complete. Then, the edition is complete and your content is saved. 4 Start the content you just created.
Page 147 • Select the app's touch pad to control in the same way the pointer of the Magic Remote Control works. • Select Game Pad on the LG Magic Remote app to control game apps on the ✎ The supported functions may vary depending on the TV or the version of the...
Page 148 To❐use❐a❐USB❐wired/wireless❐mouse ❐ ❐ Connect your mouse to a USB port on the TV. Use the mouse to move the pointer on the TV screen and select the menu you want. Mouse Magic Remote Control Left Button OK Button on Magic Remote Control Wheel Button Wheel Button on Magic Remote Control ✎...
Page 149 Web browser. ✎ Text cannot be entered on some screens. ✎ It is recommended to use a product which is tested for compatibility with LG LOGITECH K200, LOGITECH K400, MICROSOFT Comfort Curve 2000, MICROSOFT MS800, and LG Electronics ST-800 ✎...
Page 150 Connect your gamepad to the USB port on the TV if the game requires a gamepad. ✎ It is recommended to use an authorized gamepad which is tested for compatibility with LG TV. Logitech F310, Logitech F510, Logitech F710, Logitech Rumblepad 2, and Microsoft Xbox 360 Controller (wired)
Page 151: Set-Top Box Control
Set-Top Box Control ❐ If you have a Magic Remote, you can use it to control your Set-Top Box tuner (cable box, satellite box, or IPTV box). Before set up, make sure that the set-top box is connected to your TV. Set the set-top box following the instructions on the screen.
Page 152 To reset/disconnect the set-top box ❐ MY APPS ➾ INPUT ➙ Set the set-top box manipulation ➙ Resetting/ Disconnect Resetting Deletes the set-top box settings and restarts the setup wizard. Disconnect If you no longer wish to use this feature, click disconnect.
Page 153 To control a set-top box with the Magic Remote Control ❐ Select the external input connected to the set-top box. You can use the direction, OK, and channel buttons on the Magic Remote Control. You can use various function buttons of the set-top box by pressing MY APPS button on the Magic Remote Control.
Page 154 Supported Set-top Box Brands ❐ • Cable: Evolution, General Instrument, Hamlin, Hitachi, Homecast, Kaon, Motorola, Moxi, Pace Micro, Panasonic, Pioneer, Samsung, Scientific Atlanta (CISCO), Sky, Sony, Telnet, Tivo, Tocom, Zenith • IPTV: ADB, Amino, Entone, Minerva, Motorola, Myrio, Pace, Scientific Atlanta (Cisco), Tivo, Wegener •...
Page 155: Software Update
HOME ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Set it to On. When an update file is detected, the file is automatically Software Update downloaded.
Page 156 ✎ The latest version can be obtained via digital broadcast signals or internet connections. ✎ Changing the channel while downloading the software via digital broadcast signal interrupts the download process. Returning to the initial channel allows downloading to resume. ✎ If software is not updated, certain functions may not work properly.
Page 157 If the following symptoms occur, please recheck the system. It may not be a failure. General ❐ Problem Solution Cannot view certain • Adjust the location or orientation of the antenna. channels. • Save the desired channels on Auto Tuning Channel Edit.
Page 158: Picture Test
Pictures ❐ HOME ➾ Settings ➙ SUPPORT ➙ Picture Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Solution Images from previous • Try adjusting the antenna to the direction of the TV...
Page 159 Problem Solution • Such a problem may happen when there is strong Vibrating horizontal/vertical electronic interference. Turn off other electronic devices lines and fishnet patterns such as mobile phones, power tools and other small appear momentarily. electrical appliances. • It may happen when the signals are weak or the The screen display freezes reception unstable.
Page 160 Problem Solution • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and Image is not on or not clear out or not be displayed properly. when connected to HDMI. • Verify that all cable connections are securely connected. When connections are not secure, images may not be properly displayed.
Page 161 Sound ❐ HOME ➾ Settings ➙ SUPPORT ➙ Sound Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no • Check other TV channels.
Page 162 Problem Solution • If it happens on a certain TV channel, it may be caused TV sound is not in sync with by problems with an individual station’s broadcast the lips or the sound breaks signal. Check with the TV station or local cable up occasionally.
Page 163 Problem Solution On certain channels, sound • On Language, set Language ➙ Audio Language as the does not come out or only desired language. Even if the language on Multi Audio the background music plays. is changed, once the power is turned off or the channel (If it is a program created for is changed, the default settings will be reset.
Page 164: Pc Connection Problem
PC connection problem ❐ Problem Solution • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. The screen display is not • Restart the PC with the TV on. on after connecting to • Check if the resolution is correctly set for PC input.
Page 165 Problem Solution When connected to the • Set up the resolution supporting PC input. (If it does not computer, the display is work, please reboot the computer.) partially cut off or shifts • Select Screen (RGB-PC) and adjust Position/Size/Phase. to one side.
Page 166: Trouble With Replaying Movies In My Media
Trouble with replaying movies in My Media. ❐ Problem Solution • Check if the file on the USB storage device can be read Files on the Movie List are on a computer. not displayed. • Check that the file extension is supported. "This file is invalid." The • Verify that the file replays normally on the video player in above error message the computer.
Page 167 Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer.
Page 168 Problem Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. Subtitle is not displayed. • Verify that the video and subtitle files are placed in the same folder.
Page 169: Federal Communications Commission (Fcc) Statement
❐ Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Page 170 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules.
Page 171: Fcc Rf Radiation Exposure Statement
❐ Indoor use only FCC Caution: for indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. ❐ FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Page 172 ❐ COFETEL(Para México) La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Page 173: Industry Canada Statement
❐ Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1 this device may not cause interference and 2 this device must accept any interference, including interference that may cause undesired operation of the device ❐...
Page 174: Ic Radiation Exposure Statement
❐ IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Page 175 ❐ Avis d’Industrie Canada sur l’exposition aux rayonnements Cet appareil est conforme aux limites d’exposition aux rayonnements d’Industrie Canada pour un environnement non contrôlé. REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES MODIFICATIONS NON AUTORISÉES APPORTÉES À...
Page 176 If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. and Information of Regional Take back Schemes can be found at : http://www.lg.com/global/sustainability/environment/take-back-recycling.jsp...
Page 177 ❐ On Disposal (Only, LCD TV with Hg lamp) • The fluorescent lamp used in this product contains a small amount of mercury. • Do not dispose of this product with general household waste. • Disposal of this product must be carried out in accordance to the regulations of your local authority.
Page 178 ❐ DISPOSICIÓN (Sólo lámpara de Hg utilizada en TV LCD) • La lámpara fluorescente usada en este producto contiene una cantidad mínima de mercurio. • No disponga este producto junto con la basura normal de la casa. • La disposición de este producto debe ser manejado de acuerdo a los reglamentos de la autoridad local.

This manual is also suitable for:

42pm4700

LG 50PM4700 User Manual

Quick Links

User Guide

Related Manuals for LG 50PM4700

Summary of Contents for LG 50PM4700

This manual is also suitable for:

Table of Contents