Region Code - Sony XAV-63 Operating Instructions Manual

Av center
Hide thumbs Also See for XAV-63:
Table of Contents

Advertisement

*3 Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W × 4 (at 4 ohms)
General
Outputs:
Video output terminal (rear)
Audio output terminals (rear/sub switchable)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Inputs:
Illumination control terminal
Remote controller input terminal
Antenna (aerial) input terminal
Parking break control terminal
Microphone input terminal (XAV-64BT only)
Reverse input terminal
Camera input terminal
AUX audio input terminals (front/rear)
AUX video input terminal
USB signal input connector
External input terminal
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions: Approx. 178 × 100 × 170 mm
1
× 4 × 6
3
(7
/
/
in) (w/h/d)
8
4
Mounting dimensions: Approx. 182 × 111 × 164 mm
1
× 4
3
× 6
1
(7
/
/
/
in) (w/h/d)
4
8
2
Mass: Approx. 1.9 kg (4 lb 3 oz)
Supplied accessories:
Remote Commander: RM-X170
Parts for installation and connections (1 set)
Microphone (XAV-64BT only)
Optional accessories/equipment:
Mobile monitor: XVM-B62
USB and Video connection cable for iPod:
RC-202IPV
Rear View Camera: XA-R800C
Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
information.
US and foreign patents licensed from Dolby
Laboratories.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
Design and specifications are subject to change
without notice.

Region code

The region system is used to protect software
copyrights.
The region code is located on the bottom of the unit,
and only DVDs labeled with an identical region code
can be played on this unit.
DVDs labeled
can also be played.
ALL
If you try to play any other DVD, the message
"Playback prohibited by region code." will appear on
the monitor screen. Depending on the DVD, no region
code may be labeled even though playing the DVD is
prohibited by area restrictions.
System requirements for using
SensMe™
Computer
• CPU/RAM
– IBM PC/AT compatible machine
– CPU: Intel Pentium III Processor 450 MHz or
higher
– RAM: 256 MB or more (For Windows XP), 512
MB or more (For Windows Vista or later)
• USB port
OS
Windows XP, Windows Vista, Windows 7
For details on compatible editions or Service Packs,
visit the support site on the back cover.
Monitor
High color (16-bit) or more, 800 × 600 pixels or more
Other
Internet connection
Notes
• The following system environments are not
supported.
– Non IBM PC type computers, such as Macintosh,
etc.
– Homemade computers
– OS upgraded computers
– Multi-display environment
– Multi-boot environment
– Virtual machine environment
• Depending on the computer condition, operation
may not be possible even with the recommended
environment.
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xav-64bt

Table of Contents