Looper Cover Unit - Janome 134D Service Manual

LOOPER COVER UNIT

TO REMOVE
1. Remove the machine base (C).
2. Remove the two set screws (A), and remove the looper cover unit (B).
TO ATTACH
3. Attach the looper cover unit (B) to the machine body (D) temporarily with 2 set screws (A).
4. Adjust the opening and closing functions of looper cover (B).
5. Tighten two set screws (A) firmly.
6. Attach the machine base (C).
www.promelectroavtomat.ru
9