Inspection Of Nbi Function - Olympus MAJ-2306 Instructions Manual

5.2

Inspection of NBI function

Confirm that the NBI function works properly.
1
By referring to the instruction manuals for the LED light source and surgical
microscope used in combination with this instrument, set the power switch of the LED
light source to ON and then turn ON the surgical microscope.
2
Adjust the white balance by referring to the instruction manual for the surgical
microscope.
CAUTION
Be sure to adjust the white balance before use. Otherwise, imaging with correct
color reproduction will be impossible.
NOTE
When the white balance of the WLI mode has been adjusted, the white balance of
the NBI mode is adjusted automatically.
3
Tap the "Observe" button on the touch panel of
the surgical microscope.
MAJ-2306 INSTRUCTION MANUAL
5.2 Inspection of NBI function
Observe
Figure 5.2
Ch.5
47