Canon S800 User Manual page 63

•
Always grasp the plug when you unplug the power cord. Pulling on the power
cord could damage the cord and cause a fire or electric shock.
Never use an extension cord. To avoid a fire or electric shock,
always plug the power cord directly into the power outlet.
Never use a power supply voltage other than that supplied in the
country where you purchased the printer. Using incorrect voltage
could cause a fire or electric shock. The correct power supply
voltage for this printer is AC 120V, 60 Hz.
Cleaning and Maintaining the Printer Cleaning and Maintaining the Printer
Cleaning and Maintaining the Printer Cleaning and Maintaining the Printer
•
Use only a slightly damp cloth to clean the printer. Never use flammable
solvents like alcohol, benzene, thinner, etc. If a flammable solvent contacts
an electrical component inside the printer, a fire or electric shock could
result.
•
Always unplug the printer power cord before you clean the printer. If you
mistakenly turn on the printer while cleaning it, you could touch moving
components inside the printer and suffer injury.
•
Never attempt to disassemble or modify the printer. The printer contains high
voltage components which could cause a fire or serious electric shock.
Working Around the Printer Working Around the Printer
Working Around the Printer Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray
could cause a fire or electric shock if they come in contact with
electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is
printing. The printer contains moving parts which could cause
injury.
Never place anything on top of the printer, especially metal
objects (paper clips, staples, etc.), or containers with flammable
solvents (alcohol, thinners, etc.) Objects falling into the printer
could cause a fire or electric shock.
Appendix
59