Canon S800 User Manual page 17

To load envelopes: To load envelopes: To load envelopes: To load envelopes:
1.
Lower the paper thickness lever to the
envelope mark.
2.
Slide the paper feed guide completely to
the left.
3.
Press down on the corners and sides of
the envelopes to make them as flat as
possible by expelling all of the air in them.
To avoid paper jams, make sure the
envelops are flat before you load them
into the sheet feeder.
4.
With the address side facing up and
pointed down, align the stack with the
right side of the sheet feeder, then insert
the stack into the printer.
5.
Slide the paper guide right to the edge of
the sheet.
•
•
•
•
Make sure that none of the flaps are overlapping.
If the edges of the envelopes are not sharp, crease them with
the side of a pen.
You can load up to 10 standard #10 envelopes in the sheet
feeder.
Do not allow more than 10 envelopes to stack on the paper
output tray.
Basic Printing
13