Sony MHC-GNZ55D Operating Instructions Manual page 83

A VIDEO INPUT VIDEO jack
(Except for MHC-GNZ55D)
Use a video cord (not supplied) to connect the
video output jack of the VCR to this jack. You
can then output video signal through this system.
B VIDEO INPUT AUDIO L/R jacks
(Except for MHC-GNZ55D)
Use audio cords (not supplied) to connect the
audio output jacks of the VCR to these jacks.
You can then output audio signal through this
system.
C TV/SAT AUDIO IN L/R jacks
(Except for MHC-GNZ55D)
Use audio cords (not supplied) to connect the
audio output jacks of an optional component
(such as TV or satellite tuner) to these jacks.
You can then output audio signal through this
system.
D DVD DIGITAL OUT jack
(MHC-GNZ77D/MHC-GNZ55D only)
Use a digital optical cord (square, not supplied)
to connect the digital optical input jack of the
amplifier to this jack. The sound is output
through this system when DVD function is
selected. You can enjoy 5.1 channel sound, if the
connected amplifier equipped with Dolby
Digital or DTS decoder. If the jack is covered
with a cap, remove it before use.
Note
If you press AUDIO, SOUND FIELD or any karaoke
button, or if you connect or disconnect microphones or
headphones, the sound cuts off for a moment.
E COMPONENT VIDEO OUT
jacks
(Except for MHC-GNZ55D)
Use component video cords (not supplied) to
connect the component video input jacks of the
TV or projector to these jacks. If your TV accept
progressive format signals, you must use this
connection and set to progressive format
(page 21). You can enjoy higher quality video
images.
Note
You cannot output the video signal from the VIDEO
INPUT VIDEO jack through the COMPONENT
VIDEO OUT jacks of this unit.
F S VIDEO OUT jack
(Except for MHC-GNZ55D)
Use an S video cord (not supplied) to connect
the S video input jack of the TV to this jack. You
can enjoy higher quality video images.
Note
You cannot output the video signal from the VIDEO
INPUT VIDEO jack through the S VIDEO OUT jack
of this unit.
G VIDEO OUT jack
Use a video cord (supplied) to connect the video
input jack of the TV to this jack.
H SUBWOOFER OUT jack
(MHC-GNZ88D/MHC-GNZ77D only)
Use an audio cord (not supplied) to connect the
audio input jack of an optional subwoofer* to
this jack.
* SA-GNV111D is recommended.
In some areas, the SA-GNV111D may not yet be
available.
Note
The effect may be limited or noise may occur
depending on the connected subwoofer or the type of
music being played back. For details, consult your
nearest Sony dealer.
continued
83 GB