BenQ PE8700 Service Manual page 68

Z069
Z070
Z071
Z072
Z073
Z080
Z099
The length of the command must be 11. The format, take an example, to read DMD
color wheel delay:
Z072RxxxxxZ, where
Byte 1: must be 'Z' or 'z'
Byte 2~4: function code
Byte 5: action, must be 'r' or 'R'
Byte 6~10: Don't care
Byte 11: must be 'Z' or 'z'
In contrast, if write DMD color wheel delay:
Z072W+0025Z, where
Byte 1: must be 'Z' or 'z'
Byte 2~4: function code
Byte 5: action, must be 'w' or 'W'
Byte 6: sign byte, must be '-' or '+'
Byte 7~10: the value to be written
Byte 11: must be 'Z' or 'z'
All manuals and user guides at all-guides.com
Gamma offset -- Blue
DMD -- Brightness
DMD -- Contrast
DMD -- Color Wheel Delay
DMD -- Degamma table
Burn-in hours
On line help
67