Connecting The System To The Network - Sony NAS-CZ1 Operating Instructions Manual

Connecting the system to the network

After the software installation is complete, connect the system to your computer using the Ethernet port
of your computer, a router with a built-in network switch, or a network switching device.
The connection method may vary depending on your network. Connection with a personal computer is
described here as an example.
For details, refer to the Connection manual contained on the supplied CD-ROM.
Example: DSL or cable modem equipped with a built-in router (without
network switch ports)
Network cable
(supplied)
* Connections may vary depending on your network.
12 GB
To Ethernet port
NAS-CZ1 NAS-CZ1
Internet
DSL or cable
modem with a
built-in router*
Hub
Computer