Using The Recording Timer; Recording A Radio Program Using The Recording Timer; Recording From An External Component Using The Recording Timer - Sony Giga Juke NAC-HD1E Operating Instructions Manual

Using the Recording
Timer
You can set the timer to record a
radio program or playback from an
external component that is connected
to the ANALOG IN jack or DIGITAL
(COAXIAL/OPTICAL) IN jack/connector
on the unit. To use this function, the clock
must be correctly set beforehand (page 18).
You can make a maximum of 10 recording
settings.
Recording a radio program using the
Recording Timer
You can record a radio broadcast at a
specified time. To do this, the clock and the
radio station must be set in advance.
1
Press TIMER.
The timer list appears.
2
Enter the Option menu and select
[New setting] – [FM/AM record].
3
Set each item.
In the pull-down menu, select and set
each item (shown in the "Settings for
the Recording Timer" on page 70).
4
Select [OK].
The setting is registered and appears in
the timer list.
5
Press TIMER or BACK.
The setting is set and the TIMER
indicator lights up.
To stop a timer recording
Press  or HDD REC .
Notes
 After making the Recording Timer setting, you
cannot set another one that overlaps with the time
set for the previous one. You can do this, however,
by suspending the previous setting (page 72).
 Certain functions will not perform during the
minute and half before a Recording Timer setting
is set to go off.
 The activation of the Recording Timer may
be delayed by certain operations if they are
performed shortly before the Recording Timer is
set to start.
 If you do not add a title to a recording, the details
of the recording (i.e., the recording date and time)
are automatically used as the title.
Recording from an external component

using the Recording Timer

1
Select the external component
(source) from which you want to
record on the amplifier.
2
Press TIMER.
3
Enter the Option menu and select
[New setting] – [Analog In record] or
[Digital In record].

Continued

GB