Sony CMT-CP500MD Operating Instructions Manual page 25

After recording
Use Name Function on page 24. You can input
a total of approximately 1700 characters for the
disc title and track titles on a single MD.
1
Press MD on the remote to switch the
function to MD.
To label a track, press . or > on the
remote repeatedly until the desired track
number appears.
2
Press NAME EDIT/SELECT on the
remote.
The cursor starts flashing.
3
Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
The display changes as follows:
Selected AB* (Upper cases) t Selected
ab* (Lower cases) t Selected 12
(Numbers) t Selected AB* (Upper cases)
t ...
* Press number 1 repeatedly to display the
following symbols.
' – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press . or > on the remote
repeatedly to display the following symbols.
& + < > _ = " ; # $ % @
4
Verify that a cursor flashes in the
display. Then enter a character.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button
repeatedly until the character to be
entered flashes.
Or, press the button once and press .
or > on the remote repeatedly.
2 Press CURSORt on the remote.
The flashing character is entered and the
cursor shifts to the right.
`
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
To enter a blank space
1 Press NAME EDIT/SELECT on the
remote to select upper case or lower
case letters.
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
5
Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6
Press ENTER/YES on the remote to
complete the labeling procedure.
The titles you labeled appear sequentially,
and then the original display appears.
Note
You can label a track title during play. The playback
repeats until you finish labeling.
continued
GB
25