Product Configurations; Important! Keep For Future Refer- Ence - Chicco BebeCare Kiros i-Size Manual

CHICCO Kiros
i-Size (40-78cm)
IMPORTANT! KEEP FOR FUTURE REFER-
ENCE.
VERY IMPORTANT!
IMMEDIATELY.
IMPORTANT: READ CAREFULLY THE ENTIRE
INSTRUCTIONS BOOKLET BEFORE USE IN
ORDER TO AVOID RISKS WHEN USING THE
PRODUCT AND STORE IT FOR FUTURE
REFERENCE. FOLLOW THESE INSTRUCTIONS
CAREFULLY IN ORDER NOT TO COMPROMISE
YOUR CHILD'S SAFETY.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND PACKAGING
MATERIALS AND KEEP THEM OUT OF REACH OF
CHILDREN. IT IS RECOMMENDED TO DISPOSE
OF THESE ITEMS AT AN APPROPRIATE WASTE
SORTING COLLECTION POINT, AS REQUIRED BY
REGULATIONS IN FORCE.
INSTRUCTIONS FOR USE
1. INTRODUCTION

1.1 Product configurations

1.2 Warnings
1.3 Product features
1.4 Description of the components
1.5 Positions of the handle
1.6 Restrictions and requirements regarding
the use of the product and vehicle seat
2. CAR INSTALLATION
2.1 Installation and removal of the i-Size base
2.2 Installation of the Kiros i-Size child car seat
on the i-Size base
2.3 Installation of the Kiros i-Size child car seat,
without the i-Size base, using the car's
3-point seat belts
3. ADDITIONAL OPERATIONS
3.1 Placing the child in the child car seat and
adjusting the safety harness
3.2 Use as reclined cradle
TO BE READ
16
3.4 Canopy
3.5 Cleaning and storage
1.1 PRODUCT CONFIGURATIONS
The Kiros i-Size child car seat is available in two
versions:
- Kiros i-Size Clip-On (Fig. A) compatible with
the Alysia stroller
- Kiros i-Size Fast-In (Fig. B) compatible with the
Best Friend stroller and some strollers in the
Chicco range using the appropriate adaptors.
The only difference between the two versions
is the way they attach to the stroller. For use
with Chicco strollers refer to the instructions
that came with the stroller.
Installation in the car (with or without the
i-Size base) works the same for both versions.
WARNING! The instructions and illustrations
provided in this manual refer to the Kiros i-Size
Fast-In version.
The Kiros i-Size child car seat can be installed
in two different ways:
- With the i-Size base, which may be part of the
product configuration or may be sold as an
accessory
- Without the i-Size base, with the car's 3-point
seat belts
1.2 WARNINGS
• Keep this instruction manual for future ref-
erence.
• Read these instructions carefully before as-
sembling and installing the product. Do not
let anyone use the product unless they have
read these instructions.
• WARNING! According to accident statistics,
a vehicle's rear seat is generally safer than the
front seat: therefore it is recommended to in-
stall the i-Size base and the child car seat on
the rear seats.
• WARNING! SERIOUS DANGER! Never use
this device fitted on front vehicle's seats
equipped with a front airbag. It is possible
to fit the i-Size base and the child car seat on
a front seat only if the front airbag has been
deactivated: check with the car manufacturer