Weighing Units/Height Measurement Selection - Detecto 7550 Owner's Manual

WEIGHING UNITS/HEIGHT MEASUREMENT SELECTION

When the scale is turned on for the first time, it will display a prompt to select the
weighing units and height measurement to use for your operation, LB/IN
(pounds/inches), or KG/CM (kilograms/centimeters). The weighing units and
height measurement selection can ONLY be made at this time and cannot be
changed afterward. Make sure you select the correct weighing units and height
measurements before proceeding.
Make sure you select the correct weighing
units/height measurement. Once selected
the weighing units/height measurement is
permanent and cannot be changed.
Press the key to turn the scale on.
1. The scale display will show the
software version for a few seconds,
the Detecto logo briefly, and then
change to a WARNING screen. This
screen is displayed to inform and warn
you that once you have made the
weighing units/height measurement
selection, it is PERMANENT and
cannot be changed.
3. After reading and understanding the
warning screen, press OK on the
screen to continue.
4. If weighing in pounds (LB) and
measuring in inches (IN) is required
for your operation, press LB/IN at the
bottom left of the screen.
5. If your operation requires weighing in
kilograms (KG) and measuring in
centimeters (cm), press KG/CM on
the bottom right of the screen.
6. Your 7550 Wall-Mount Fold-Up Wheelchair Scale is now ready for operation.
0065-0647-OM Rev E 7550 OWNER'S MANUAL
WARNING!
!!!WARNING!!!
Units Selection
PERMANENT
LB/IN
OK
Will Be
Select Units
KG/CM
9