Cleaning Your Alarm - Kidde TRUSENSE SMOKE 3050-VDS10 User Manual

Multi-criteria optical sensor smoke alarm with voice – battery operated
Table of Contents

Advertisement

13. Cleaning Your Alarm

your alarm Should be Cleaned at least Once a year
You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose
and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the alarm
can be wiped with a damp cloth. Use only water to dampen the cloth, use of detergents or cleaners could
damage the alarm.
If the alarm is in Fault mode , the alarm may be in need of cleaning. After cleaning, press the button. If the fault
does not clear, the alarm needs to be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the sensor's ability to detect smoke.
• Never attempt to disassemble the unit to clean inside. This action will void your warranty.
WaRNiNG: REiNSTall ThE alaRM aS SOON aS POSSiblE TO ENSURE CONTiNUOUS
PROTECTiON.
18

Advertisement

Table of Contents
loading

Table of Contents