Inserting A Blank Space During Recording (Record Muting) - Sony TC-WE435 Operating Instructions Manual

Stereo cassette deck
Hide thumbs Also See for TC-WE435:
Table of Contents

Advertisement

To stop dubbing
During
Normal-speed dubbing
High-speed dubbing
z
During high-speed dubbing
Only the p button is operative.
z
You don't have to adjust the recording level or
select the Dolby NR during dubbing
Dubbing is automatically performed with the same
recording level and Dolby NR as the original in deck A.
If, however, you want to monitor the sound during
normal-speed dubbing, set the DOLBY NR selector to
match the tape in deck A (see page 5).
z
You can adjust the pitch of the playback on deck A
See page 5.
Note
If a TV set is placed near the tape deck, noise may occur
during high-speed dubbing. In that case, turn the television
set off or move it away from the tape deck.
Dubbing only specific portions
You can do this only during the normal-speed
dubbing.
1
Press p on deck A at the portion you want to
skip.
Deck B changes to recording pause.
2
Locate the point you want to resume recording on
deck A, then stop the tape.
3
Press PAUSE P to resume dubbing.
Press
p on deck B
p on either deck
Advanced Recording Operations
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between the
tracks. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function (see page 8). You can also use this function to
erase unwanted portions on a tape.
U
0
)
p
ª
·
§
PAUSE P
REC MUTING R
1
Follow Steps 1 to 5 of "Recording on a Tape" on
pages 6 and 7.
Recording starts.
2
Press REC MUTING R where you want to insert a
blank space.
"REC" flashes in the display and a blank is
recorded on the tape.
After 4 seconds, P lights up and the tape deck
changes to recording pause.
3
Press PAUSE P or · to resume recording.
z
If you want to insert a blank space longer than
4 seconds
Hold down REC MUTING R as long as you want.
After 4 seconds, "REC" flashes faster.
When you release REC MUTING R, P lights up and the
tape deck changes to recording pause.
Press PAUSE P or · to resume recording.
0
)
p
ª
·
P
R
r
§
·
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents